Animal Weighing Procedure - Adam Equipment ABK Series User Manual

6.8.1ANIMAL WEIGHING PROCEDURE

• With the platform empty the display will show zero weight.
containers or blankets onto the platform and press the [Z/T] key to zero
the display.
procedure when the items are placed on the scale but will return to
showing zero when the [Z/T] key is pressed.
• Place the animal or sample to be weighed on the platform.
• The display will show the Animal/Dynamic weighing symbol
stable weight is determined. The time it takes for the stable value will
depend upon the setting of the filter parameter in the first step.
• When a stable reading is found, the display will show this value, and the
display will be locked until the [Z/T] key is pressed. The display will
show the "Hold" symbol while the display is locked.
• To weigh a second subject press the [Z/T] key if necessary to zero the
display, and place the next animal on the scale. The scale will detect
the new weight and hold it as before.
• The scale will remain in the animal weighing mode until the [Unit/]
key is pressed. Then it will return to normal weighing.
The scale may go into the animal (dynamic) weighing
22
| © Adam Equipment Company 2011
P a g e
Place
until a