Accuracy Specifications
34405A User's and Service Guide
Transfer Accuracy
Transfer accuracy refers to the error introduced by the
multimeter due to noise and short
becomes apparent when comparing two nearly
for the purpose of "transferring" the known accuracy of one
device to the other.
1
Year Accuracy
–
These long
term accuracy specifications are valid at the
–
calibration temperature (T
These specifications include the initial calibration errors plus
the multimeter's long
Temperature Coefficients
Accuracy is usually specified at the calibration temperature
(T
) ± 5 °C temperature range. This is a common
cal
temperature range for many operating environments. You
must add additional temperature coefficient errors to the
accuracy specification if you are operating the multimeter
outside the ± 5 °C temperature range (the specification is
per °C).
–
term drift. This error
) ± 5 °C temperature range.
cal
term drift errors.
–
Specifications
6
–
equal signals
143