Disassembly For Repair - Kenwood TK-7100 Service Manual

4-1. Remove the display unit
To remove the display unit from the panel, follow the cor-
rect procedures shown (A regular screw driver is needed
as illustrated).
q
Open the bottom of display unit
at No. 1 as indicated.
w
Open the bottom of display unit
at No. 2 as indicated.
e
Open the bottom of display unit
at No. 3 as indicated.

DISASSEMBLY FOR REPAIR

r
Open the top of display
unit at No. 4 as indicated.
t
Lift up the display unit and remove.
4-2. Mount the display unit
To mount the display unit on the panel, follow the correct
procedures shown to ensure easy display unit assembly
and good fitting onto the panel.
q
TK-7100
15