MPP Solar PIP-MS 1-5KVA User Manual page 21

18 Alarm control
Auto return to default
19
display screen
20 Backlight control
Beeps while primary source
22
is interrupted
Overload bypass:
When enabled, the unit will
23 transfer to line mode if
overload occurs in battery
mode.
25 Record Fault code
Bulk charging voltage
26
(C.V voltage)
Solar and Utility
(Only available for
4KVA/5KVA model)
Only Solar
If this inverter/charger is working in Battery mode or Power
saving mode, only solar energy can charge battery. Solar
energy will charge battery if it's available and sufficient.
Alarm on (default)
Return to default
display screen
(default)
Stay at latest screen
Backlight on
(default)
Alarm on (default)
Bypass disable
(default)
Record enable
24V model default setting: 28.2V
48V model default setting: 56.4V
19
Solar energy and utility will charge
battery at the same time.
Solar energy will be the only charger
source no matter utility is available or
not.
Alarm off
If selected, no matter how users
switch display screen, it will
automatically return to default display
screen (Input voltage /output voltage)
after no button is pressed for 1
minute.
If selected, the display screen will stay
at latest screen user finally switches.
Backlight off
Alarm off
Bypass enable
Record disable (default)