MPP Solar PIP-MS 1-5KVA User Manual page 17

03 AC input voltage range
Power saving mode
04
enable/disable
05 Battery type
Auto restart when overload
06
occurs
10A (Not available
for 2-3KVA 24V Plus)
30A
50A
Available options in 4K/5K model
70A
90A
110A
Appliances (default)
UPS
Saving mode disable
(default)
Saving mode enable
AGM (default)
User-Defined
Restart disable
(default)
15
20A
40A
60A (default)
80A
100A
120A
If selected, acceptable AC input
voltage range will be within
90-280VAC.
If selected, acceptable AC input
voltage range will be within
170-280VAC.
If disabled, no matter connected load
is low or high, the on/off status of
inverter output will not be effected.
If enabled, the output of inverter will
be off when connected load is pretty
low or not detected.
Flooded
If "User-Defined" is selected, battery
charge voltage and low DC cut-off
voltage can be set up in program 26,
27 and 29.
Restart enable