Add Decoder - HIKVISION DS-6101DI Series User Manual

User Manual of DS‐6101DI Decoder

4.2 Add Decoder

Click and then click
to enter the decoder settings interface.
Right click the Decoder list, and select
Add decoder, or click
Input decoder name, IP, Port, Username,
Password, and click OK to finish adding
decoder.
User can also click the Online Decode
Note:
option to select and add the online device.
Option
Decoder type
Decoder name
Decoder IP
Port
Username/Password
The 6101DI decoding source is described as below:
Decode type
to add decoder.
Instruction
CIF and 4CIF can be selected according to your decoder model, and different model
of decoder could have different decode performance.
The name of the Decoder, which can be user-defined.
The IP address of the Decoder.
The device port of the Decoder.
The username and password of the Decoder.
Instruction
20