Hardware Installation; Precautions; Package Contents - Brocade Communications Systems Mobility 7131 Series Installation Manual

Hardware Installation

A Brocade Mobility 7131 Access Point or Brocade Mobility 7131N Access Point
installation includes mounting the access point, connecting the access point to the
network, connecting antennae and applying power. Installation procedures vary for
different environments.
Both a Brocade Mobility 7131 Access Point and Brocade Mobility 7131N Access
Point have the following port designations:
•
GE1/POE - LAN port
•
GE2 - WAN Port

Precautions

Before installing a Brocade Mobility 7131 Access Point and Brocade Mobility 7131N
Access Point, verify the following:
•
Do not install in wet or dusty areas without additional protection. Contact a
Brocade representative for more information.
•
Verify the environment has a continuous temperature range between -20° C to
50° C.

Package contents

Check package contents for the correct model of the Brocade Mobility 7131 Access
Point or Brocade Mobility 7131N Access Point and applicable accessories. Each
available configuration (at a minimum), contains:
•
Brocade Mobility 7131 Access Point or Brocade Mobility 7131N Access Point
(accessories dependent on SKU ordered)
•
Brocade Mobility 7131 Series Access Point Installation Guide (this guide,
supporting both Brocade Mobility 7131 Access Point and Brocade Mobility
7131N Access Point models)
•
Wall mount screw and anchor kit
Brocade Mobility 7131 Series Access Point Installation Guide
53-1001935-02
Chapter
2
5