Table of Contents
Advertisement
Wireless devices - countries
Remote and standalone antenna configurations
To comply with FCC RF exposure requirements, antennas that are mounted
externally at remote locations or operating near users at stand-alone desktop of
similar configurations must operate with a minimum separation distance of 20 cm
from all persons.
Power supply
Use only a Brocade approved power supply output rated at 48Vdc and minimum
0.75A. The power supply shall be Listed to UL/CSA 60950-1; and certified to
IEC60950-1 and EN60950-1 with SELV outputs.
Use only a Brocade approved power supply. Use of alternative power supply will
invalidate any approval given to this device and may be dangerous.
Wireless devices - countries
Country selection
Select only the country in which you are using the device. Any other selection will
make the operation of this device illegal.
Operation in the US
The use on UNII (Unlicensed National Information Infrastructure) Band 1
5150-5250 MHz is restricted to indoor use only, any other use will make the
operation of this device illegal.
The available channels for 802.11 b/g operation in the US are Channels 1 to 11.
The range of channels is limited by firmware.
Brocade Mobility 7131 Series Access Point Installation Guide
53-1001935-02
5
49
- Quick Links:
- Resetting the Access Point's Password
Hide quick links:
Advertisement
Table of Contents
