Mounting the access point
d. Attach the power adapter cable into the power connector on the Mobility
7131 Series Access Point.
e. Attach the power supply line cord to a power supply.
5. Verify the behavior of the access point LEDs. For more information, see
indicators"
6. Align the bottom of the ceiling T-bar with the back of the access point.
7.
Orient the access point chassis by its length and the length of the ceiling T-bar.
8. Rotate the access point chassis 45 degrees clockwise.
9. Push the back of the access point chassis on to the bottom of the ceiling T-bar.
10. Rotate the access point chassis 45 degrees counter-clockwise. The clips click
as they fasten to the T-bar.
Brocade Mobility 7131 Series Access Point Installation Guide
53-1001935-02
CAUTION
Do not actually connect to the power source until the cabling portion of
the installation is complete.
on page 19.
2
"LED
15