Brocade Communications Systems Mobility 7131 Series Installation Manual page 17

2
Mounting the access point
The hardware and tools (customer provided) required to install the access point on
a wall consists of:
•
Two Phillips pan head self-tapping screws
(ANSI Standard) #6-18 X 0.875in. Type A or AB Self-Tapping screw, or
(ANSI Standard Metric) M3.5 X 0.6 X 20mm Type D Self-Tapping screw
•
Two wall anchors
•
Wall mount template (included on the next page)
•
Security cable (optional third part provided accessory)
10 Brocade Mobility 7131 Series Access Point Installation Guide
53-1001935-02