Brocade Communications Systems Mobility 7131 Series Installation Manual page 37

3
Configuring basic device settings
NOTE
Beginning with the 4.0 release of the access point firmware, a new scheme for radio
configuration and WIPS server management has been implemented within the Quick
Setup GUI applet. Up to eight radio buttons are now available (depending on the
number radios supported by the SKU). These radio buttons define how WLAN and
WIPS are supported amongst the radios available to the access point. The options
available depend strictly on the SKU supported (and are described within this
section).
To define a basic access point configuration:
1. Select System Configuration -> Quick Setup from the menu tree, if the Quick
Setup screen is not already displayed.
2. Select the System Configuration tab to define the access point's system, WIPS
server and radio configuration.
NOTE
Beginning with the 4.0 release of the access point firmware, WIPS functionality
is no longer configured within a designated WIPS screen. The WIPS Server
designation and radio configuration is now defined as part of the access
point's quick setup. For a description of WIPS functionality and how it relates to
access point operation, refer to the Brocade Mobility 7131 Series Access Point
Product Reference Guide available at http://www.brocade.com/support/.
30 Brocade Mobility 7131 Series Access Point Installation Guide
53-1001935-02