Omron E5AN Communications Manual page 59

Variable Ad-
Parameter name
type dress
C3 (83) 0020 Auxiliary Output 2 Open in
Alarm
C3 (83) 0021 Alarm 2 Hysteresis
C3 (83) 0022 Auxiliary Output 3 Open in
Alarm (See note 1.)
C3 (83) 0023 Alarm 3 Hysteresis
(See note 1.)
C3 (83) 0024 HB ON/OFF
C3 (83) 0025 Heater Burnout Latch
C3 (83) 0026 Heater Burnout Hysteresis
C3 (83) 0027 ST Stable Range
α
C3 (83) 0028
C3 (83) 0029 MV Upper Limit
C3 (83) 002A MV Lower Limit
C3 (83) 002B Input Digital Filter
C3 (83) 002C Additional PV Display
C3 (83) 002D MV Display
C3 (83) 002E Automatic Display Return
Time
C3 (83) 002F Alarm 1 Latch
C3 (83) 0030 Alarm 2 Latch
C3 (83) 0031 Alarm 3 Latch (See note 1.)
C3 (83) 0032 Move to Protect Level Time
C3 (83) 0033 Input Error Output
C3 (83) 0034 Cold Junction Compensa-
tion Method
C3 (83) 0035 MB Command Logic
Switching (See note 2.)
Note: The alarm function can also be used in Controllers without alarm output terminals. In this case,
confirm alarm occurrences via the status data.
Note 1: Not displayed on the Controller display when Alarm 3 is not assigned to the output.
Note 2: The logic is switched only in the MB command (SYSWAY). The logic of CompoWay/F operation
command code 00 (communications writing) is not affected.
3.1 Variable Area (Setting Range) List
Setting (monitor) value
H'00000000 (0): Close in alarm
H'00000001 (1): Open in alarm
H'00000001 to H'0000270F
(0.1 to 999.9 for TC/Pt universal input models)
(0.01 to 99.99 for Analog input models)
H'00000000 (0): Close in alarm
H'00000001 (1): Open in alarm
H'00000001 to H'0000270F
(0.1 to 999.9 for TC/Pt universal input models)
(0.01 to 99.99 for Analog input models)
H'00000000 (0): OFF
H'00000001 (1): ON
H'00000000 (0): OFF
H'00000001 (1): ON
H'00000001 to H'000001F4 (0.1 to 50.0)
H'00000001 to H'0000270F (0.1 to 999.9)
H'00000000 to H'00000064 (0.00 to 1.00)
Standard: MV lower limit + 0.1 to H'0000041A (MV lower limit +
0.1 to 105.0)
Heating and cooling: H'00000000 to H'0000041A (0.0 to 105.0)
Standard: H'FFFFFFCE to MV upper limit − 0.1 (−5.0 to MV upper
limit − 0.1)
Heating and cooling: H'FFFFFBE6 to H'00000000 (−105.0 to 0.0)
H'00000000 to H'0000270F (0.0 to 999.9)
H'00000000 (0): OFF
H'00000001 (1): ON
H'00000000 (0): OFF (display of manipulated variable OFF)
H'00000001 (1): ON (display of manipulated variable ON)
H'00000000 (0): OFF
H'00000001 to H'00000063 (1 to 99)
H'00000000 (0): OFF
H'00000001 (1): ON
H'00000000 (0): OFF
H'00000001 (1): ON
H'00000000 (0): OFF
H'00000001 (1): ON
H'00000001 to H'0000001E (1 to 30)
H'00000000 (0): OFF
H'00000001 (1): ON
H'00000000 (0): OFF
H'00000001 (1): ON
H'00000000 (0): OFF
H'00000001 (1): ON
Level
Advanced
function
setting
Initial set-
ting
Advanced
function
setting
Initial set-
ting
Advanced
function
setting
Adjust-
ment
Advanced
function
setting
3-9