The network disk recorder (WJ-ND400K, WJ-ND400K/G) is designed for use within a surveillance system, and record images/audio
from the connected network cameras on the hard disk drives (HDDs).
Up to 64 cameras can be connected via a network.
The optional HDDs encased in the provided HDD canisters (hereinafter referred as HDD units) can easily be installed/removed in/from
It is possible to perform the settings or operate the recorder using a web browser installed on a PC connected to a network. (It is
necessary to configure the network settings of a PC to operate this product using a PC.) Up to 16 PCs (web browsers) can access
the recorder concurrently and it is possible to perform the settings and operate the recorder. (The maximum number of PCs that can
access the recorder varies depending on the network.)
* No HDD is supplied with this recorder. For purchasing HDD, contact your dealer.
About the user manuals
There are 4 manuals provided for the WJ-ND400K, WJ-ND400K/G as follows.
Installation Guide (this book):
Setup Instructions (PDF):
Operating Instructions (PDF):
Quick Reference Guide:
is required to read the PDF files (the setup instructions and the operating instructions) on the provided CD-ROM.
"WJ-ND400" or "ND400" shown in the instructions and illustrations used in these operating instructions indicate the WJ-ND400K,
The screens used in these operating instructions show the case of NTSC model.
Refer to "readme.txt" on the provided CD-ROM for further information about the optional dedicated software, compatible cameras
and their versions.
Contains descriptions of how to install/connect this product, and descriptions of how to
operate this product with the buttons on the front panel.
Contains descriptions of how to configure the required settings and how to connect to
Contains descriptions of how to operate this product with a PC.
Contains descriptions of how to configure the basic settings and how to use the major
is not installed on the PC, download the latest Adobe
from the Adobe web site and install it.