Panasonic WJ-ND400K Installation Manual page 15

t HDD slots
Up to 9 HDD units can be installed.
Note:
• Requirements to use in the RAID 5/RAID 6 mode
To use in the RAID 5 mode: The RAID 5 mode is operable
only when 3 or more HDD units are installed in the
recorder.
To use in the RAID 6 mode: The RAID 6 mode is operable
only when 4 or more HDD units are installed in the
recorder.
y [RAID] switch
Use this switch to determine the operational mode (Single/
RAID 5/RAID 6).
Select the operational mode by determining the [RAID]
switch position, and then turn on the power of the recorder
by pressing the [POWER] switch while holding down the
[USE] button until the buzzer sounds. The recorder will
start up in the selected operational mode.
S: Single mode (Default)
R5: RAID 5 mode
R6: RAID 6 mode
Important:
• Do not change the operational mode after starting the sys-
tem operation. If the operational mode is changed after
starting the system operation, accessing the recorded data
may fail.
u Removal knob
Use this knob to remove the HDD unit.
15