2-Port Operation - Panasonic WJ-ND400K Installation Manual

● 2-port operation
Direct connection using a hub
Connect cameras and PCs using the camera port and the client PC port at the rear of the recorder.
Images from the cameras transmitted to the camera port will be transmitted to the PCs from the client PC port.
Important:
• Connect the cable from the hub to which the cameras are connected to the camera port, and connect the cable from the hub to
which the PCs are connected to the client PC port.
An incorrect connection may lower the transmission efficiency.
PC
PC
Hub
Network cameras
Hub
LAN cable
(Locally procured: 10BASE-T /
100BASE-TX / 1000BASE-T
category 5e, straight (NTSC model) /
category 7, straight (PAL model))
Recorder
27