Alarm Connection - Panasonic WJ-ND400K Installation Manual

● Alarm connection
When a signal is supplied to the alarm input terminals 1 - 32 (pin nos. 1 - 12, 15 - 25 of the ALARM connector, pin nos. 1 - 9 of the
ALARM/CONTROL connector), recording and displaying of images from the cameras will be performed according to the settings.
When an alarm device such as a buzzer, a lamp, etc., is installed outside, connect them to the alarm output terminals (pin no. 21 of
the ALARM/CONTROL connector).
Alarm equipment
*Attached when necessary.
38
Sensor
(Signal ground)
13
Relays etc.*
(Alarm output)
9 14 1
ALARM
21
ALARM/CONTROL
Door security
switch