■ Check the IP address
It is possible to check the DHCP status, IP address, subnet mask, gateway* and HTTP port* for each port. Each port will be dis-
played as follows.
Camera port: PT#1, Client PC port: PT#2, Maintenance port: PT#3
The display of each port can be shifted using the arrow button (left or right).
* The settings of "Gateway" and "HTTP port" can be checked with the display of the client PC port (PT#2).
The default network settings of the recorder are as follows.
Item
DHCP
IP address
Subnet mask
Default gateway
HTTP port
Shift the display and configure each setting as described below.
The display on the LCD will shift by pressing the arrow button (up or down).
Camera port
−
192.168.0.250
255.255.255.0
−
−
[SET]
[ESC]
Client PC port
OFF
192.168.1.250
255.255.255.0
192.168.1.1
80
Maintenance port
−
192.168.2.250
255.255.255.0
−
−
43