Factory Setup And Screen Calibration; Data Initialization; Touch Calibration - GRAUPNER Polaron Operating Instructions Manual

◎ FACTORY SETUP AND SCREEN CALIBRATION

37
Button for Channel changing and initializing
< Factory Setting >

1. Data Initialization

2. Touch Calibr ation
3. Resource Upgr ade
4. BLC Port T est
Smart BMS *POLARON*
Press and hold the button. Turn on the charger's power.
1. Return to the factory setup.
2. Touch screen calibration.
3. Image and sound update.
4. Checking the balance port.
The user can adjust No. 1,2,3. The manufacturer
can adjust No. 4 (The user can not adjust).
Data Initialization
*** Factory Data ***
Tap No1 to access the factory data mode.
Initializing Data... The blinking characters alternate between red and blue,
indicating that the program is operational. After the Data
Initialization has completed, the return to the Start up page
will proceed automatically.
Smart BMS *POLARON*
Touch calibration (Touch screen calibration)
Tap the "+" icon 3 times on the screen to arrange the screen.
After completing the arranging process, the system will be rebooted for the charging
mode.
Tap anywhere on the screen to complete the Touch calibra-
tion. Then, return to the Start up page.
38