Bay Front - Majestic Vemont Castings RHE25 Installation Instructions & Homeowner's Manual

Vermont Castings, Majestic Products RHE Natural Vent Insert
On units fitted with a Honeywell brand control
valve the location of the control knobs and
the ignitor button may vary slightly from those
shown in Figure 51. The Honeywell extension
pieces are visually different in design and are
not interchangeable with the RN/RP knobs
shown in Figure 51.
2. Install the hanging brackets. (Fig. 52)
3. Install bracket on each side of the cabinet. (Fig. 56)
4. Install the two ceramic pieces inside the bay window.
(Fig. 48)
5. Install the bay window by hanging it onto the lower
tabs of the hanging brackets. (Fig. 51)
6. Install top louvre by engaging the oblong holes with
the upper tabs of the hanging brackets. (Fig. 54)
7. Install brass trim to the steel frame. (Fig. 55)
Fan Control Box
Fig. 49 Remove fan control box.
Fan Control
Box
Extension
Bracket
Fig. 50 Attach the control box to the bracket and install
bracket into the cabinet.
Extension
Knobs
Fig. 51 Install the knob extensions. (RN/RP models Only)
KT204

Bay front

knob ext
32
3/19/01 djt
KT205
KT205
Bay Front
remove fan control box
3/19/01 djt
KT207
KT207
Bay Front
attach fan control box
HEDV30/HEDV32
3/19/01 djt
KT204a
Hanging Bracket
Fig. 52 Hanging bracket alignment.
Fig. 53 Hang the window grille or the steel frame onto the
KT203
lower tabs of the hanging brackets.
Bay Front
Hanging bracket HEDV30
3/19/01 djt
Fig. 54 Engage the slots in the upper grille top louvre with
the upper tabs of the hanging bracket.
KT210
Install bay front
3/19/01 djt
Fig. 55 Attach magnets and brass trim to the steel frame.
KT210
Install bay front
3/19/01 djt
Fig. 56 Bracket for HEBTKP.
KT209a
KT210
KT211
KT212a
KT212a
Attach Brass Trim
3/4/03 djt
FP1270
10000836