Table of Contents
Advertisement
Troubleshooting
E
N
G
L
I
■
DVD video, Video CD, CD, CD-R, CD-RW
S
H
Trouble
79
The disc is inside but
no sound.
The disc is ejected
automatically.
CD sound skips, tone
quality is low.
Sound skip due to
vibration.
The buttons do not
work.
The disc is not ejected.
■
DVD video
Trouble
Cannot switch the audio
language / subtitle
language / angle.
The audio / subtitle
language selected in the
DVD settings is not
used.
88
CQ-VAD9200U
(continued)
The disc is upside down.
a
Place the disc in the correction direction, the label side up.
The disc is dirty.
a
Clean the disc, referring to the section on "Notes on Discs"
The unit can only play the following types of discs: DVD video, video CD, music
CD and MP3.
Connect the optical fiber cable.
The disc is dirty.
a
Clean the disc, referring to the section on "Notes on Discs"
Mounting angle is over 30°.
a
Adjust mounting angle to less than 30°.
Unstable mounting.
a
Mount the unit securely with the mounting parts, referring to the section on
installation.
Some operations are not permitted with certain discs.
(Refer to the guide provided with your disc.)
¡Disc is defective.
¡Mechanical trouble.
a
Press [u]. If failure persists, press the reset switch. If normal operation
is not restored, call the store where you purchased the unit or the nearest
Panasonic Servicenter to ask for repairs.
¡It is not possible to switch if the disc does not have multiple audio languages
/ subtitle languages / angles recorded on it. (Refer to the guide provided with
your disc.)
¡Some discs permit switching through a menu screen.
¡Sometimes, switching angles is possible only with certain scenes.
If audio or subtitles in the languages are not recorded on the disc, the audio or
subtitles do not switch to that language. (Some discs permit switching through
a menu screen. Refer to the guide provided with your disc.)
Cause / Step
Cause / Step
(a
page 95).
(a
page 95).
Advertisement
Table of Contents
