Table of Contents
Advertisement
[MODE]
(End)
3
Setting
[OSD]
(CAPTURE)
[MENU]
[]] [[]
(Select)
[ENTER]
q Press [ENTER] to import the image.
w Press [[] or []] to select a place where the image is stored.
e Press [ENTER] to save the image.
¡You can store three images at maximum.
¡Three pictures are pre-stored as default images but those are over-written if
you capture and save new images.
Notes:
¡Do not turn off the unit while saving an image.
¡To capture an image from TV, the broadcasting condition should be fairly
well.
¡You can recall default images only by clearing memories so that images that
you have stored are cleared as well.
Direct Image Capture
If you would like to capture a picture, press and hold [OSD] (CAPTURE) for
more than 2 seconds.
Subsequent steps are the same as the steps w described above.
Notes:
¡Press [MODE] to return to the regular mode.
¡The display returns to the previous one if there is no
operation for more than 60 seconds after changing to
the setting menu.
(a
page 42)
(Only for remote control)
CQ-VAD9200U
E
N
G
L
I
S
H
42
51
Advertisement
Table of Contents
