Table of Contents
Advertisement
Installation Guide
E
N
G
L
I
S
H
63
❏ Installation Procedures
(When using Mounting Collar w)
Note: The car model,
installation conditions and
combination of the units
used may impose some
restrictions on opening
and closing the monitor as
well as on the angle and
position to which the
monitor can be adjusted.
@6 Power Connector
72
CQ-VAD9200U
(continued)
Mounting the Display Unit
1
#0 Optical Fiber Cable
@ 9 Display Unit / Hide-away
Unit Connecting Cord
t Mounting Bolt (M5)
e Mounting Spring
2
!1 Flat-Head Screw
(M5 x 6 mm)
3
4
5
6
Insert the Mounting Collar w into the dashboard, and
bend the mounting tabs out with a screwdriver.
Fastening the Mounting Collar
The tabs to bent vary depending on the car. Bend them
with a screwdriver to fasten the Mounting Collar w
securely in the dashboard.
w Mounting Collar
Tab
Attach the Mounting Springs e to the display unit.
Establish the rear connection of the unit.
After fixing Power Connector @6 , Display Unit / Hide-away
Unit Connecting Cord @9 and Optical Fiber Cable #0 , fix
the rear of the unit to the car body by either method (a) or
(b) shown at right.
Insert the unit into Mounting Collar w
Secure the clamp plate of Mounting Collar
w to the hook of Mounting Spring e .
Insert Trim Plate q.
After installation
reconnect the negative
(–) battery terminal.
Dashboard
Clamp plate
Advertisement
Table of Contents
