Table of Contents
Advertisement
[MODE]
(End)
3
Setting
Notes:
¡For smooth adjustment, make sure to first return the lateral angle to the neutral position and then adjust the tilt angle.
¡Front-rear position "REAR" and tilt angle "5" cannot be selected at the same time.
¡The monitor position setting menu can also be displayed by pressing the [TILT] button on the display unit for more
than 1 second.
(a
page 21)
q Press [}] or [{] to select
an item.
w Press [[] or []] to select
the setting.
e Press [ENTER] to set.
[MENU]
[}] [{]
[]] [[]
(Select)
[ENTER]
TILT
Press [{] or [}] to select the setting.
1
2
3
4
SLIDE
Press []] or [[] to select the setting.
FRONT
NAVI INPUT
RGB
: Connected to the RGB input cord, or a car navigation system
not connected
: Connected to the VTR1-IN
VTR1
VTR2
: Connected to the VTR2-IN
Note: Make sure to select "RGB" when no car navigation is connected.
NAVI VOLUME
0
: The sound that a car navigation system generates does not come out.
1
2
3
4
Low
NAVI MUTE (dB)
0
: Unchanged
–10
: Decrease 10 dB
Notes:
¡Press [MODE] to return to the regular mode.
¡The display returns to the previous one if there is no
operation for more than 60 seconds after changing to
the setting menu.
Tilting angle adjustment
5
Front-rear position
REAR
Navigation input
Navigation volume
5
: Volume level
High
Navigation mute level
–20
: Decrease 20 dB
∞
: No sound
–
CQ-VAD9200U
[{]
[}]
Front
Rear
[]]
[[]
E
N
G
L
I
S
H
30
39
Advertisement
Table of Contents
