Table of Contents
Advertisement
Installation Guide
E
N
G
L
I
❏ Installation Procedures (When not using Mounting Collar w)
S
H
Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with car
65
manufacturers, car types and manufacturing year. Please consult your nearest dealer or installer.
Select mounting screws according to the hole positions and hole shape of the bracket.
! 0 Binding-Head Screw (M5 x 6 mm)
! 2 Binding-Head Screw (M4 x 3 mm)
! 1 Flat-Head Screw (M5 x 6 mm)
Use the supplied Spacer !3 if mounting hole of your car is shaped like below.
Mounting Hole
of a Bracket
(in section)
Bracket
!0 Binding-Head Screw
(M5 x 6 mm)
Existing Bracket (L)
(Bracket originally
attached to the car)
Before mounting the speaker, wipe water, dust and oil stains
off from the place where the speaker should be mounted to
enhance adhesive strength.
Cautions:
¡Do not install the speaker in a location which obstructs
operation of the air bag or other safety equipment.
¡Do not leave a credit card or other magnetic cards near
the speaker to avoid damaging the cards.
74
CQ-VAD9200U
Recycle the Binding-Head Screws that fixed the transportation brackets for two more
positions.
4 pieces
Not used
!3 Spacer
!4 Double-Faced Adhesive Tape
Mounting the Speaker
(continued)
2 pieces
4 pieces
Display Unit
!5 Double-Faced
Adhesive Tape
When using these
mounting holes
!0 Binding-Head Screw
(M5 x 6 mm)
!3 Spacer
Existing Bracket (R)
!4 Double-Faced
Adhesive Tape
Speaker
!6 Clamp
Advertisement
Table of Contents
