Table of Contents
Advertisement
Method for Fixing the Rear of the Unit
(a) Using the Rear Support Strap o
Drill a hole 6.5 to 7 mm
in diameter.
i Washer Assembling Hex.
Bolt (M6 x 20 mm)
o Rear Support Strap
*1: Use M5 x 8 mm size bolt (optional) if bolts other than
the supplied ones are to be used.
To Remove the Display Unit
q Push the right and left clamp plates outward, one at a time, and pull the display unit toward yourself.
w After removing the right and left clamp plates, pull the unit with both hands till it comes off.
q
y Flange Nut
(M6)
Fire wall of car
u Washer
Assembling
Hex. Bolt
(M5 x 10 mm)*1
Display Unit
Push here to
remove the
clamp plates.
(b) Using the Rubber Pad r
t Mounting Bolt (M5)
Display Unit
w
CQ-VAD9200U
r Rubber Pad
Bracket
(On car)
E
N
G
L
I
S
H
64
73
Advertisement
Table of Contents
