Table of Contents
Advertisement
Chapter 3
Power Management Timer
Set the idle time before system enters power saving mode. ACPI OS such as
Windows XP will override this option. Settings:
and
40 (minutes)
1 (hour)
Video Off Option
Select whether or not to turn off the screen when system enters power saving
mode, ACPI OS such as Windows XP will override this option. Settings are:
Always On
Suspend -> Off
Power Off by PWRBTN
This field configures the power button function. Settings are:
Delay 4 Sec
Instant-Off
Run VGABIOS if S3 Resume
Select whether to run VGA BIOS if resumed from S3 state. This is only
necessary for older VGA drivers, select
and
No
AC Loss Auto restart
The field defines how the system will act after an AC power loss during
system operation. Choose the system power state when the AC power is
back. Settings are:
Off
Keep the system in off state until power button is pressed.
On
The system automatically restarts when AC power is back.
The screen is always on even when system
enters power saving mode.
The screen is turned off when system enters
power saving mode.
The system is turned off if power button is pressed
for more than four seconds.
The power button functions as a normal power-on/-
off buttton.
3-20
and
Disable
if in doubt. Settings:
Auto
1/2/4/6/8/10/20/30/
Auto, Yes
Advertisement
Table of Contents
