Table of Contents
Advertisement
Chapter 2
CPU Installation
The mainboard supports the Intel
Celeron
processors in the 478 pin package (PGA478). When installing the
®
CPU, ensure the CPU has a large-size heatsink and a cooling fan
attached on the top to prevent overheating. If the heatsink and cooling
fan are not included with the CPU, contact your dealer to purchase and
install them before turning on the computer.
CPU Installation
Pentium
4 Willamette/Northwood and
®
®
1. Pull the lever sideways away from
the socket. Then raise the lever up
to a 90-degree angle.
2. Look for the dot/cut edge. The dot/
cut edge should point towards the
lever pivot. The CPU will only fit
in the correct orientation.
3. Hold the CPU down firmly, then
close the lever shut to complete the
installation.
2-2
Advertisement
Table of Contents
