Table of Contents
Advertisement
Chapter 2
SDRAM Module Installation Procedures.
1. The DDR DIMM module has only one
notch on the center.
2. Align the SDRAM module with the
corresponding notches on the DIMM
slot. The modules will only fit if placed
in the correct position.
3. With both hands, press the SDRAM
module down into the DIMM slot so that
the white retaining latches rotate up and
secure the module in place (see picture
below).
Available SDRAM Configurations
Refer to the table below for available SDRAM configurations on the main-
board.
Slot
DIMM
(Bank 0 & 1)
Maximum System Memory Supported
Memory Module
64MB, 128MB, 256MB, 512MB, 1GB
2-6
Total Memory
64 MB - 1 GB
64 MB - 1 GB
Advertisement
Table of Contents
