Table of Contents
Advertisement
IDE Primary Master/Slave, Secondary Master/Slave
Press Enter to enter the sub-menu and the following screen appears:
The specifications of your drive must match with the drive table. The hard
disk will not work properly if you enter improper information for this
category. Select
Auto
information provided is from your hard disk vendor or system manufacturer.
IDE <Primary
Master>
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
PIO Mode
Ultra DMA Mode
whenever possible. If you select
The name of this menu item will match the
name of the menu. The settings are None,
Auto, Manual.
The settings are CHS, LBA, Large, Auto.
The formatted size of the storage device.
Number of cylinders.
Number of heads.
Write precompensation.
Cylinder location of the landing zone.
Number of sectors.
The settings are Mode 0/1/2/3/4, Auto.
The settings are Disabled and Auto.
3-7
BIOS Setup
, make sure the
Manual
Advertisement
Table of Contents
