Connectors - INSIGHT P4-ITX User Manual

Chapter 2

Connectors

Hard Disk Connectors: IDE1 & IDE2
The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 66/100 con-
troller that provides PIO mode 0~4, Bus Master, and Ultra DMA 66/100
functions. You can connect up to four hard disk drive, CD-ROM, LS-120
and other devices. These connectors utilize the provided IDE hard disk
cable.
N
A
IDE1 IDE2
IDE1 (Primary IDE Connector)
The first hard drive should always be connected to IDE1. IDE1 can connect
a Master and a Slave drive. You must configure the second hard drive to
Slave mode by setting the jumper accordingly.
IDE2 (Secondary IDE Connector)
IDE2 can also connect a Master and a Slave drive.
If you install two hard disks on a single cable, you must set the jumper on the
second hard disk drive to slave mode. Please refer to the hard disk documen-
tation supplied by hard disk vendor for the jumper settings.
2-12