Engine Coolant Temperature Gauge Simple Inspection; Egnine Coolant Temperature Gauge Unit Inspection - Dodge Stealth 1994 Service Manual

ENGINE COOLANT TEMPERATURE GAUGE SIMPLE INSPECTION

Remove the water temperature
gauge unit coupling connector.
Connect the harness connector
via a test light to the ground.
Place the ignition switch in the
ON position.
Check the test light and gauge conditions.
2 Test light lights. (Pointer of gauge swings.)
@ Test light does not light. (Pointer of gauge
does not swing.)
CHASSIS ELECTRICAL
ENGINE COOLANT TEMPERATURE GAUGE UNIT INSPEC-
TION
To check, remove
the intake
housing of the DOHC engine.
Engine Coolant Temperature Gauge Unit Resistance
1 cooo:
(2) After checking, apply the specified sealant around the
t
I -
engine coolant temperature gauge unit from
manifold of the SOHC engine or from the thermostat
Standard value: 104k13.5 R
thread of engine coolant temperature gauge unit and install
on the intake manifold of the SOHC engine or on the
thermostat housing of the DOHC engine.
Specified sealant: MOPAR Part No. 4318034 or equiva-
lent
<DOHC> , Engine coolant
temperature gauge :
Replace water temperature gauge.
Replace water temperature gauge
unit.