Inspection - Dodge Stealth 1994 Service Manual

HOW TO DIAGNOSE

INSPECTION

Check relay operation, blower motor rotation, light illumina-
tion, etc. visually or aurally. The flow of current is invisible
but can be checked by the operation of the parts.
2. Simple checks
For example, if a headlight does not come on and a faulty
fuse or poor grounding is suspected, replace the fuse with a
new one or ground the light to the body by a jumper wire to
determine which part is responsible for the problem.
1680222
3. Checking with instruments
Use an appropriate instrument in an adequate range and
read the indication correctly. You must have sufficient
knowledge and experience to handle instruments correctly.
INSPECTION INSTRUMENTS
In inspection, make use of the following instruments.
1. Test lights
A test light consists of a 12V bulb and lead wires. It is used
to check voltages or shortcircuits.
2. Self-power test light
A self-power test light consists of a bulb, battery and lead
wires connected in series. It is used to check continuity or
grounding.
1680226