REMOVAL AND INSTALLATION
Bank Warm Up Three-Way Catalytic
(Refer to GROUP 11 - Exhaust Pbe. I
Removal steps
1. Air hose E <Turbo>
2. Air pipe C <Turbo>
3. Clamp nuts of suction hose
4. Drive belt
(Refer to GROUP 9 - Service Adjustment
Procedures.)
5. Generator connector
6. Heated oxygen sensor connector
7. Generator and generator bracket assembly
8. Generator bracket
9. Generator
ENGINE ELECTRICAL
SERVICE POINT OF REMOVAL
3. REMOVAL OF CLAMP NUT
On vehicles with air conditioning, remove the clamp nut,
raise the suction hose and suspend it from the engine hood
using a cord.
6
'I