Installation - Wespot SecNurse User Manual

3. Installation

The installation procedure consists of five steps:
Mounting instructions
In order to get the sensor to work in a satisfying way, it must be mounted correctly.
The first step in the mounting procedure is to attach the mounting bracket on the wall.
Thereafter the sensor can be easily snapped on the bracket. The design of the bracket
allows you to remove the sensor from the bracket, in order to move the sensor from one
bed to another.
The SecNurse can be mount on two different heights. When the bed zone has been con-
figured, the sensor will automatically recognize which mounting height is being used.
At both mounting positions it is important that the sensor is mounted horizontally, above
the middle of the bed and on the wall. This is important for a correct detection angle.
Large pieces of furniture should not be placed close to the bed, since this will affect the
detection performance negatively.
1. Mount the sensor on the wall
2. Connect the sensor
3. Configure the bed zone
4. Set timer and sensitivity settings
5. Make a functional test
IMPORTANT!
The installation must be made in a correct way in
order to get proper functionality.
IMPORTANT!
Always use the mounting bracket for optimal
performance.
- 8 -