hager LCP01X User Manual page 13

6. Thread the power cable into one of the
guides at the back of the base.
Alternative
guides
8. Screw it back into the same place hence
locking the base in "table" position.
Pozidriv 0
10. Tighten the locking screw to prevent the
base from being opened by mistake.
Pozidriv 2
7. Unscrew the locking screw.
Pozidriv 0
9. Close the base.
11. Stick the 4 anti-slip pads to the back
of the base and then put it on the table.
187
G