In The Handset - hager LCP01X User Manual

G

10.2 In the handset

When you change the controller batteries, it is also advisable to change the handset batteries.
1. Take the handset off its base and remove
the belt clip by pressing on one of its
sides.
3. Replace the flat MTU01X battery with a
new once.
5. Programme the time
using
The temperature display will be updated
several minutes after the handset has
been powered.
and .
C
2. Insert a flat screwdriver into the slot and
press to open the handset.
4. Close the handset, put the belt clip back
on and then place the handset back on
its base in order to start it up.
IMPORTANT:
• There is a risk of explosion if the battery/ies
is/are not properly replaced.
• Replace the flat battery/ies with the same type.
• Do not expose the battery to excessive heat
(e.g. a flame) and do not throw it in a fire.
Dispose of flat batteries in the appropriate
waste disposal containers.
230
3.5
If necessary, the
icon flashes to indicate that
the handset is charging.
Li