hager LCP01X User Manual page 38

G
9.1.1 The controller is used as a transmitter
Application examples
By creating a radio link between a controller and an output receiver, the following applications can
be set up:
• gate opening can switch on lighting to facilitate night time access and gate closing can switch
off lighting,
• electrical latch opening can switch on courtesy lighting for a programmable duration,
• etc.
• pressing on the outdoor caller unit call button can trigger a door bell installed elsewhere for a
programmable duration.
1. Switch to radio link creation mode.
Press on the
The radio link LED lights up orange.
Radio link to be created
Radio link to be created
Controller
key.
2. Switch to radio link creation mode.
3. Select the function.
Information available in the receiver product
manual.
212
Receiver