Panasonic KX-TVS120 Installation Manual page 299

Other Parameters-External Message Delivery
Controls the handling of External Message Delivery calls.
To access the proper menu for External Message Delivery, follow the menu path as
shown:
System Administration Top Menu-1-5-7-4
Parameter
Retry Times
Busy Delay
No Answer
Delay
Outgoing Call
Ports
Message
Length
Max. Messages
for Mailboxes
System
External
Message
Delivery
Duration Time
Installation Manual
Table 68
Value Range
(Default)
0-9 times Specifies the number of times to attempt an external
(3) message delivery call when the destination is busy or if
there is no answer.
1-60 min Specifies the length of time in minutes the VPS must wait
(3) after a busy condition is received before trying to deliver
the message again.
60-120 min Specifies the length of time in minutes the VPS is to wait
(60) after a no answer condition is received before trying to
deliver the message again.
Port No. Specifies the port numbers used for the External Message
(1-24) Delivery feature.
Note: The maximum number of ports depends on the VPS
model.
1-6 min Specifies the allowable message length of external
(3) delivery messages that the subscriber can record.
1-100 msgs Specifies the maximum number of external delivery
(3) messages that can be stored in 1 mailbox.
1-9 min Specifies the maximum telephone connect time allowed
(3) for an external message delivery call to prevent excessive
telephone charges. Time begins counting when the
destination number answers the call. The VPS terminates
the call when it exceeds the specified length of time.
However, the VPS does not terminate a call until the
whole message is played even though the specified time
expires.
SYSTEM ADMINISTRATOR'S GUIDE
Description/Function
299