Panasonic KX-TVS120 Installation Manual page 181

1.
Type SAVE, then Press RETURN.
$ SAVE
VPS Disk Data Save (VPS -> PC : Xmodem)
1: Program
2: Parameters
3: System Prompts
4. User Prompts-1
5. User Prompts-2
6. Custom Service Menus
7. Personal Greetings
8. Company Greetings
Selection No. :=
2.
Select item to be backed up, then Press RETURN. The size of the file will be displayed.
To start press 'RETURN'
3.
Press RETURN.
- - - - - - SAVE Start!!
4.
Perform a Standard File Transfer. Set the data terminal to the receiving (Answer) mode
(Xmodem) and specify the backup filename. The specified data will be transmitted to the
data terminal.
Notes
• The data terminal that you use must be equipped with communications software that
supports the Xmodem file transfer protocol. The command can be canceled by Typing
[\] before entering the receiving mode. Once the receiving mode has been selected, use
the cancel command of the communication software being used.
• If your data terminal supports a high speed, it is recommended that you SAVE at the
maximum speed of 38400 bps. First, change the RS-232C setting of the VPS (see
B7.1 RS-232C Parameters). Next, change the RS-232C setting of your data terminal
to the same speed.
Installation Manual
SYSTEM MAINTENANCE AND TROUBLESHOOTING
181