Saving The System Data To The Backup Device (Save) - Panasonic KX-TVS120 Installation Manual

SYSTEM MAINTENANCE AND TROUBLESHOOTING
Table 34 Error and Warning Indications During System Operation
DISK STORAGE SPACE IS NOW
EXCEEDING
80%...
ASCII TERMINAL program Load Error
VT100 program Load Error

7.2.7 Saving the System Data to the Backup Device (SAVE)

All system programming data and voice prompts (8 functional areas) can be saved in separate
data files. To save this data, connect a data terminal to the RS-232C port of the VPS. Save the
files individually. Execute the SAVE command for each data file. It will require several
minutes to execute this command for all the data selected. When performing this operation,
always wait until the process completion indication appears.
WARNING
Never save (back-up) and upload the "Program" without Panasonic Technical support.
The memory required to save each data component is indicated below.
1. Program—approximately 2 Mbytes (See Warning above)
2. Parameters—approximately 4.4 Mbyte (System Configuration)
3. System Prompts—approximately 23 Mbytes (Do not save—prompts are
saved as defaults in the drive)
Saving items 4-7 below will depend upon the length of the recorded messages.
4. User Prompts-1
5. User Prompts-2
6. Custom Service Menus (Custom service recordings)
7. Personal Greetings (Subscriber greetings)
8. Company Greetings
180
Indication Meaning
80 % or more of the HDD voice message
save area is used.
Error loading of ASCII terminal control
program.
Error loading of VT100 control program.
Installation Manual