Panasonic KX-TVS120 Installation Manual page 227

FEATURE
Message Delivery allows a subscriber to check the status of
Status messages that have been sent. The sending
subscriber has the option of canceling any of
the messages after checking their status. If a
recorded message has not been received, the
VPS will voice report the following: the
message's destination mailbox number and its
contents.
Message delivery status information is
automatically deleted after the message has
been received by the subscriber, or when the
subscriber cancels the delivery, or when a
new message arrives after 84 delivery status
messages have been stored in the subscriber's
mailbox (the oldest status message is always
deleted first).
Message Reception allows incoming calls to be received by either
Mode a subscriber's regular or interview mailbox.
This mode is effective for: (1) Incomplete
Call Handling Service (when the subscriber's
line is busy, or he cannot take the call, or
when he has enabled Call Blocking), and (2)
when the transfer destination of calls is set to
a Logical Extension.
Message Scan permits the subscriber to scan the first 4 s of
each message. The subscriber can replay the
previous message, play the next message, or
play the entire message.
Installation Manual
Table 37
DESCRIPTION
SYSTEM FEATURES
REFERENCES
• See 3.2 Checking Mailbox
Distribution in the Subscriber's
Guide.
• See "Interview Service" and
"Logical Extension (All Calls
Transfer to Mailbox)" in this
Table.
• See "All Calls Transfer to
Mailbox" in Table 41 in
B2 SYSTEM
ADMINISTRATION—
MAILBOXES.
• See 4.4 Message Reception
Mode in the Subscriber's Guide.
• See "Message Scanning with
Information" in Table 44 in
B3 SYSTEM
ADMINISTRATION—
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
• See C3 SETTING COS
(CLASS OF SERVICE)
PARAMETERS.
• See "Scanning Messages" in
Glossary.
• See 2.1 Receiving Messages in
the Subscriber's Guide.
227