INTEGRATING THE VPS WITH THE PANASONIC KX-T DIGITAL PBX
3.
Dial [8].
Screen output: VTR
4.
Dial the Voice Mail extension number.
Screen output: VTR- _ _ _
(_ _ _ = The extension number you entered).
5.
Press STORE.
6.
To exit the Station Programming mode, Press the PROGRAM button or lift the handset.
7.
Repeat these steps for each telephone.
Conditions:
4.4.12 Button Assignment via PC Programming
The KX-TD500 users can assign buttons via PC programming. Follow the procedure below to
assign each button.
1.
Go to "4-2 Extension Line" screen (refer to the screen image in 4.4.6 Live Call
Screening Assignment via PC Programming).
2.
Select the "Card No." and "Port No." which you are going to program.
124
This button must be a CO or DSS/BLF key to be
programmed as a VTR button. When all Voice Mail
ports are busy and this key is pressed, the user will hear
reorder tone.
Installation Manual