Timer Recording; Express Timer Programming - JVC HR-J271MS Instructions Manual

20
EN
Express Timer
Programming
Remember, the clock must be set before you can
programme the timer (
Before performing the following steps:
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the VIDEO channel (or AV mode).
Select the appropriate colour system by pressing the
COLOUR SYSTEM button (
1
4
7
START+/–
1
PROG
pg. 10).
pg. 32).
2 3
2
5 6
8 9
4
0
PR +/–
TIMER RECORDING (cont.)
ACCESS TIMER
PROGRAMMING SCREEN
1
Press PROG (If you're just
starting out, "P1" appears).
ENTER PROGRAMME
START TIME
2
Press START +/– to enter
the time you want
recording to start.
Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
ENTER PROGRAMME STOP
TIME
3
Press STOP +/– to enter the time you want recording to
stop.
Press and hold STOP +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
ENTER PROGRAMME DATE
4
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
ENTER CHANNEL
POSITION
5
Press PR +/–.
– P1 –
START STOP
=
–:– – –:– –
SP
DATE TV PROG
– –.– – – –
[+/–] =
[PROG] : EXIT
– P1 –
START STOP
=
21:00 –:– –
SP
DATE TV PROG
– –.– – – –
[+/–] =
[PROG] : EXIT
– P1 –
START STOP
=
21:00 22:00
SP
DATE TV PROG
25.04 10
[+/–] =
[PROG] : EXIT