Colour System; Editing; Edit To Or From Another Video Recorder - JVC HR-J271MS Instructions Manual

30
EN
Edit To Or
From Another
Video
Recorder
1
4
7
NUMBER "0"
1
IMPORTANT:
To edit, both the player and the recorder must be of the
same colour system. Press your recorder's COLOUR
SYSTEM button to select the appropriate colour system.
For more information on multi-system compatibility,
pg. 32.
TV Receiver
VIDEO
CHANNEL
RF Cable (provided)
Recorder
2 3
2
5 6
8 9
4
0
PR +/–
Player Your recorder
AV Cable
(not provided)
Another recorder
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player's AUDIO/VIDEO OUT connector to
the recorder's AUDIO/VIDEO IN connector.
Use the L connector for monaural connection.
SET RECORDING DECK'S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or PR +/ – to "L-1".
SELECT "EDIT" FOR PICTURE
CONTROL SET MODE
3
Follow the "Picture Control" section on page 15, then
select "EDIT."
START SOURCE PLAYER
4
Engage its Play mode.
START RECORDING DECK
5
Engage its Record mode.
NOTES:
All necessary cables can be obtained from your dealer.
When you use this recorder as the player for editing, be sure
to set "O.S.D." to "OFF" before starting (
NTSC tapes being played back in the NTSC [ PAL mode
( pg. 33) cannot be dubbed to another recorder.
When you dub an NTSC tape using your recorder as the
playback deck, select NTSC 3.58 (or NTSC 4.43) with the
COLOUR SYSTEM button (
When you select "EDIT" to dub tapes, be sure to select
"AUTO" (or "NORM" when the B.E.S.T. function is set to
"OFF") after you finish dubbing the tapes (
Recorder Your recorder
AV Cable
(not provided)
Another recorder

EDITING

pg. 8).
pg. 32).
pg. 15).
TV Receiver
VIDEO
CHANNEL
RF Cable
(provided)
Player