Turning Chime On And Off; Reading The Event Log - Pyronix STERLING 10 User Manual

Sterling 10 User Manual
Enter the new 4-digit new code twice as per the display prompts. Three tones will be heard an
acceptance of each command. A single low tone indicates that the procedure hasn't been
completed and the process will need to be started again.
Changing The Limited User Code
LCD Keypad
Func
Press the key
Enter
Then the key and scroll to 'CHANGE CODES'
Func
Press the key to accept.
Enter
Enter your 4-digit Master User Code (Default 1234).
Enter any number from 2 to 7 to select the user code you wish to add/change.
For example, to add User 2, press the
P.A.
Fire
Enter the new 4-digit new code twice as per the display prompts. Three tones will be heard an
acceptance of each command. A single low tone indicates that the procedure hasn't been
completed and the process will need to be started again.
ICON Keypad
Press the key
Followed by the key.
Enter the 4-digit Master Code.
Enter any number from 2 to 7 to select the user code you wish to add/change.
Enter the new 4-digit new code twice as per the display prompts. Three tones will be heard an
acceptance of each command. A single low tone indicates that the procedure hasn't been
completed and the process will need to be started again.
Page: 14
B key:
D EF
CHANGE CODES
PRESS USER 1-7
STERLING
ARM
A B C
A B C D E F G H I
Func
D
Enter
JKL M N O P Q R
STU VWX
YZ SPACE

2.10 Turning Chime On and Off

If this option is selected, the panel will generate a three-note sound when an entry/exit tone is
activated.
NOTE: The panel must be in 'Disarmed' Mode.
LCD Keypad
Press the
Then the
A ' ' will be displayed in the left hand corner of the LCD keypad.
To turn off the chime feature:
Press the
Then the
ICON Keypad
Press the
Then the
A ' ' will be displayed in the bottom left hand corner of the ICON keypad.
To turn off the chime feature:
Press the
Then the

2.11 Reading the Event Log

The Sterling 10 control panel incorporates a memory log of the last 100 alarm events and is
accessible to both Users and the Engineer. It will record Fire, Intruder, Personal Attack and Tamper
alarms and will also show if any of the 8 alarm zones have been triggered or omitted. To access the
Event Log:
LCD Keypad
Press the
Then the
The most recent event will be displayed.
If the key is pressed, the previous log entry will be displayed:
RINS415-9 RINS415-9
Func
key.
Enter
key.
A
A B C
Func
key
Enter
A key.
A B C
key
key.
key
key again.
Func
key
Enter
B key.
D E F
Sterling 10 User Manual
Page: 7