Displaying Chara-Den - Docomo Style F-02A Instruction Manual

Making full use of Chara-den

Displaying Chara-den

You can display a character instead of camera image during a videophone call. You
can also place a character on the stand-by display and make it act when there is a
call missed etc.
Using Chara-den during videophone call P63
m [Data Box] 7
1
The folder contents are as given below.
i-mode : Chara-den downloaded from sites
Preinstalled : Chara-den stored by default
My folder : Chara-den moved from other folders
Appears if a folder is added. P273
2
Select a folder
a
a Originated
: Preinstalled : i-mode
b File type
/ : AFD/Unavailable due to UIM operation restriction
c File restriction
: File restricted
3
Select Chara-den
While displaying Chara-den, the operations below are available.
j : Large size/Same size
1-9 : Perform applicable action
0 : Stop action
a : List actions
a (1 sec. or more) : Switch Action/Action of Parts
The current action type is indicated with icons below appearing in the
lower-left corner in the screen.
: Action : Action of Parts
b
c
1
Making a videophone call : Move the cursor to Chara-deneIeEnter a phone
number or press C to select from phonebookeI
To make a videophone call specifying conditions, enter a phone number and
press m. P55
Setting as Substitute image : Move the cursor to Chara-denea
Setting to the stand-by display :
a m3eSet required itemseC
When "Action" or "Action of Parts" is selected, you can select an action
from the action list. However, actions may not be available for some
Chara-den.
When "Input" is selected, enter a number in entry field to specify an action.
When Interval (sec) is set to "OFF", an action is performed only once.
When actions are set for Missed call and Unread message, and there are
both missed calls and unread messages, actions are performed
alternately. However, if Interval (sec) is set to "OFF", the action set for
missed calls is performed once.
b "Yes (Same size)" or "Yes (Large size)"
If i-αppli stand-by display is set, a confirmation screen for canceling the i-
αppli stand-by display appears.
Setting operating conditions of Chara-den
m [Data Box] 7em5eSet required itemseC
Display size : Set whether to zoom.
Display light time : Set light operations during playback. When set to "Terminal
settings", it operates according to Display light time (Normal use) of Display
light.
263
Data Management