Ic Transfer Service; Starting Osaifu-Keitai Compatible I-Αppli; Checking Owner Information Of Ic Card; Check Ic Owner - Docomo Style F-02A Instruction Manual

iC transfer service

*1
iC transfer service is a service that, when replacing Osaifu-Keitai in such cases as
model change or repair, transfers data in an IC card collectively
*3
Keitai .
After data in IC card is transferred, Osaifu-Keitai compatible services can be
continuously used only by downloading Osaifu-Keitai compatible i-αppli
transfer service is available at a sales outlet such as DOCOMO Shop near you.
For details of iC transfer service, refer to "Mobile Phone User's Guide [i-mode]
FOMA version".
*1 Both the source and the destination of the data need to be iC transfer service compatible
FOMA terminal. For using iC transfer service, visit available sales outlet such as DOCOMO
Shop near you.
*2 Some Osaifu-Keitai compatible services are not covered by iC transfer service, so only the
Osaifu-Keitai compatible data saved in IC card covered by iC transfer service can be
transferred.
*3 As this service is "transfer", not "copy", the data saved in IC card does not remain in the
original FOMA terminal. There may be a case that you cannot use iC transfer service, use the
backup service for each Osaifu-Keitai compatible service etc.
*4 i-αppli downloading and settings require packet communication fee.
Starting Osaifu-Keitai compatible i-αppli
When first starting or downloading Osaifu-Keitai compatible i-αppli, UIM in use
is registered as the owner (IC owner) of the IC card in the Osaifu-Keitai. After that,
IC card function cannot be used unless the UIM registered as the IC owner is
installed. Note that, when replacing UIM with another one, IC card function
cannot be used unless the IC owner is changed. P245
m [Osaifu-Keitai] 1
1
The next procedure P223 Step 3 in "Starting i-αppli"
✔INFORMATION
When Osaifu-Keitai compatible i-αppli is running, Osaifu-Keitai may be unavailable by
placing
Active Osaifu-Keitai compatible i-αppli may be interrupted in the cases below. In that
case, the data being read/written may be discarded.
*2
to a new Osaifu-
- When a call is received
- When Lock on close or Auto keypad lock is activated
- When the date specified in the watching/recording reservation of 1Seg, countdown timer, alarm
*4
. iC
clock or schedule comes
- When the function is switched over to another function
When you are out of service area or the saved data cannot be used, some Osaifu-Keitai
compatible i-αppli may not start or not operate correctly.
Press m [Osaifu-Keitai] 2 to activate DCMX
application).

Check IC owner

Checking owner information of IC card

You can check if the UIM in use is registered as the owner (IC owner) of the IC card
in the Osaifu-Keitai.
m [Osaifu-Keitai] 6
1
If not registered, install a UIM registered as IC owner, or select "How to reset
IC owner" and change IC owner. P245 Step 2 in "Changing IC owner"
❖
Changing IC owner
To change IC owner, IC owner requires to be reset. By resetting, Osaifu-Keitai
compatible i-αppli other than iD
that, for Osaifu-Keitai compatible i-αppli that the data in IC card is saved, the data
in IC card needs to be deleted by activating or redownloading i-αppli before being
reset. After reset, if starting or downloading Osaifu-Keitai compatible i-αppli, it is
registered as IC owner.
m [Osaifu-Keitai] 7
1
2
"Reset IC owner"e"Yes"eAuthenticatee"Yes"
mark over the IC card reader.
(iD setting application) are deleted. Note
(Credit service
245
Osaifu-Keitai/ToruCa