Docomo Style F-02A Instruction Manual

Style series

Table of Contents

Quick Links

Download this manual

docomo STYLE series

F-02A

'08.12

ISSUE DATE:

NAME:

PHONE NUMBER:

MAIL ADDRESS:

INSTRUCTION MANUAL

Easy Search/Contents/Precautions

Before Using the Handset

Voice/Videophone Calls

Phonebook

Sound/Screen/Light Settings

Security Settings

i-mode/i-motion/i-Channel

Full Browser

Camera

Music

i-αppli

Osaifu-Keitai/ToruCa

Data Management

Convenient Functions

Character Entry

Network Services

Overseas Use

PC Connection

Appendix/Troubleshooting

Index/Quick Manual

Mail

1Seg

Table of Contents

Chapters

Table of Contents

Troubleshooting

Need help?

Do you have a question about the Style F-02A and is the answer not in the manual?

Questions and answers

Summary of Contents for Docomo Style F-02A

Page 1 Easy Search/Contents/Precautions docomo STYLE series Before Using the Handset F-02A Voice/Videophone Calls Phonebook ‘08.12 Sound/Screen/Light Settings ISSUE DATE: Security Settings Mail NAME: i-mode/i-motion/i-Channel Full Browser PHONE NUMBER: Camera 1Seg MAIL ADDRESS: Music i-αppli INSTRUCTION MANUAL Osaifu-Keitai/ToruCa Data Management Convenient Functions...
Page 2: Before Using Your Foma Terminal
"General Inquiries" using the phone number on the back of this manual. Security Japan Ltd., SECOM Trust Systems Co., Ltd., Comodo CA Ltd. F-02A is your capable partner. Please treat it with care and enjoy using it for years. This FOMA terminal supports FOMA Plus-Area and FOMA HIGH-SPEED Area.
Page 3: Viewing/Searching This Manual
This manual provides the methods below for necessary function's easy search. Searching from Easy Search In this "Manual for F-02A", "F-02A" mobile terminal is usually referred to Search for frequently used or convenient functions by plain words. as "FOMA terminal". Please be forewarned.
Page 4 Viewing/Searching this manual Methods to search pages are described, taking "Answer machine" for example. Searching from Easy Search When you cannot answer the call When you cannot answer the call Functions frequently used and convenient Putting the call on hold when you cannot answer it immediately Putting the call on hold when you cannot answer it immediately Public mode (Drive mode) functions are categorized by their purposes...
Page 5 Function name This name is listed Answer machine The other party's message is recorded Supplementary in Index. Recording voice/video messages when you A beep announces the other party at the start and the end. And when description of approximately 25 seconds elapsed since the start, 2 short beeps are heard to cannot answer the call Outline and warn that the end is approaching.
Page 6: Easy Search
Easy Search Functions which you want to know can be searched for using friendly words. Muting keypad sound ............Keypad sound Convenient functions for calls Setting silent mode .............. Silent mode Changing color such as light ..........Light alert Showing/Hiding your phone number ....Caller ID notification Putting the call on hold ..............
Page 7: Easy Search/Contents/Precautions
Making full use of mail Other convenient functions Sending Deco-mail ..............Deco-mail Reading QR and/or bar code ......... Bar code reader Sending images and/or melodies ........Attachment Listening to music .............. Music player Automatically sorting mails ..........Sort method Using microSD card ............microSD card Sending or receiving data via infrared communication Infrared communication...
Page 8: Table Of Contents
Creating/Sending i-mode mail Deco-mail Easy Search ............4 settings Search/Edit/Delete phonebook Decome-Anime Attachment Saving i-mode Main functions of F-02A ........8 Secret attribute Quick dial etc. mail Quick mail Receiving i-mode mail Check Precautions (ALWAYS FOLLOW THESE new message Operating Inbox/Outbox Mail Sound/Screen/Light Settings DIRECTIONS) ..........10...
Page 9: Easy Search/Contents/Precautions
Dictionaries Pedometer Earphone/ Channel Saving music data Playing/ PC Connection...... 335 Microphone with switch etc. Managing music data BGM play etc. Data communication DOCOMO keitai datalink Character Entry ....307 i-αppli........221 etc. 5-touch input method Save phrase Copying/ Downloading Starting i-αppli i-αppli To i- Appendix/Troubleshooting ...
Page 10: Main Functions Of F-02A
Main functions of F-02A 1Seg Motion sensor You can watch "1Seg" that is a terrestrial digital TV broadcasting for mobile You can stop alarm sound by double-tapping FOMA terminal or enjoy devices. You can also record a still image and video while watching 1Seg.
Page 11: Easy Search/Contents/Precautions
Charging image Quick search You can display your favorite image on the sub-display while charging. P86 On the stand-by display or while performing a function, search functions of i- mode, Full Browser, Map, dictionaries, phonebook or mail can be used by Automatic lighting of sub-display pressing the search key.
Page 12: Precautions (Always Follow These Directions)
The symbols below show specific directions. Precautions (ALWAYS FOLLOW THESE This symbol denotes that the action is prohibited. DIRECTIONS) Don't Before using your FOMA terminal, or when necessary, read the This symbol denotes that disassembling the phone or its precautions below to ensure safe use and handling. After reading components is not allowed.
Page 13: And Uim (Common)
Do not disassemble or remodel the FOMA AC Adapter 01 for Global use before turning OFF the terminal.) * Contact a sales outlet such as DOCOMO Shop for equipment. Do not solder items onto No disassembly information on other compatible products.
Page 14: Handling Foma Terminal
Handling FOMA terminal CAUTION Turn FOMA terminal OFF in areas where use is prohibited, such as in Do not leave the equipment on WARNING airplanes and hospitals. unstable or sloping surfaces. May cause electronic equipment or Don't Do not direct the infrared data port May cause malfunction or injuries.
Page 15 CAUTION Turn FOMA terminal OFF near high- Do not bring magnetized objects close precision electronic control equipment to FOMA terminal. Do not swing FOMA terminal by its Don't or electronic equipment using low- Bringing strong magnetism close may cause strap. a malfunction.
Page 16: Handling Battery Pack
DANGER WARNING Mobile phones can give some users skin problems such as itching, allergic Do not connect a wire or other metal If the battery pack seems to have reactions or rashes. If you develop skin objects to the jack. And, do not carry or abnormalities such as deformation or problems, stop using the phone Don't...
Page 17: Handling Optional Devices (Ac Adapter/Dc Adapter/Desktop Holder/In-Car Holder)
Don't into a positive-ground vehicle. If incorrect voltage is used, this may cause DOCOMO Shop. If your local municipality fire or failure. When using FOMA terminal May cause fire. has a battery recycling program, dispose of overseas, use AC Adapter for global use.
Page 18: Handling Uim
Handling mobile phones near When you disconnect the adapter Wearers of implanted pacemakers or electronic medical equipment (including battery charger) from the defibrillators must carry and use outlet or cigarette lighter socket, do FOMA terminal at least 22 cm away These precautions are based on the not pull the adapter (including battery from the implanted device.
Page 19: Handling Precautions
45 and 85%. FOMA terminal may affect land-line phones, TVs or radios in use nearby, so use F-02A is waterproof, however, do not allow water to seep into the handset and do it as far as possible from these appliances.
Page 20: Battery Pack
When you store the battery pack for a long time, please be sure of the following. - If the data is deleted, DOCOMO assumes no responsibility for the loss of any data. To preserve the environment, bring the old UIM to a sales outlet such as - Storage with the battery full (state immediately after a full charge) DOCOMO Shop.
Page 21: Waterproofness
3 minutes from a distance of 2.5-3 m on a rotating turntable. If you remodel FOMA terminal by removing its screws, your certification of *2 IPX7 means that F-02A phone keeps functioning after it is slowly submerged to depth of 1 m technical standard conformance becomes invalid.
Page 22 FOMA terminal appears normal or abnormal. Back cover DOCOMO replaces the parts as a chargeable service. Bring FOMA terminal to a sales outlet such as a DOCOMO Shop. Precautions Securely lock the back cover and firmly close the external connection jack cap.
Page 23 Shake FOMA terminal approximately 20 times, firmly holding its hinge section, interfere with talking. until there is no more water splattering. DOCOMO does not guarantee actual operations under all states. Malfunctions deemed to be caused by inappropriate operation by the customer are not covered by the warranty.
Page 24 d Remove the back cover and wipe off any drops of water around the inner lid and To drain water off the speaker, shake FOMA terminal with the speaker upward the rear side of the back cover. After wiping off the water, install and lock the back cover.
Page 25 Charging Accessories and optional devices are not waterproof. Check the following before and after charging. Check that FOMA terminal is not wet. If wet, adequately drain FOMA terminal and wipe off water with dry, clean cloth etc. before connecting a desktop holder or opening the external connection jack cap.
Page 26: Accessories And Main Options
Instruction manual * Quick Manual is appended on P408. Desktop Holder F28 CD-ROM for F-02A (including operation manual) * The PDF version of "Manual for PC Connection" and "Kuten Code List" are contained in the CD-ROM. Other optional accessories P370...
Page 27: Before Using The Handset
Before Using the Handset Part names and functions ..............................Viewing display ................................... Sub-display/Light overview ............................... Selecting functions from menu ............................Using motion sensor ................................Using UIM (FOMA card) ..............................Attaching/Removing battery pack ............................ Charging ....................................Checking battery level ......................Remaining battery level Turning power ON/OFF ...........................
Page 28: Part Names And Functions
Part names and functions <Using earphone> Connect the optional earphone that can be connected to the external connection jack. To use the earphone that cannot be connected to the external connection jack, use the optional Earphone Plug Adapter to connect. Example of connecting Flat-plug Earphone/ Microphone with Switch (optional) Connecting plug of Flat-plug...
Page 29 l Shooting indication light <Functions of parts> P63, 180 <Functions of keys> a Light sensor Turn on or blink for still image shooting or movie The functions available by pressing keys are as recording. Sense the ambient luminance (automatic below. mark P244, 277 adjustment of the brightness of the display).
Page 30 rRedial/ * /A/a/Line feed/Public mode (Drive mode) (next) key Side keys TTV key/Camera Display Redial, switch displays, move the cursor rightward. Activate 1Seg. Enter " ", " ", " ", etc., switch upper/lower case. Start/Cancel IC card lock. Stop ring alert, alarm sound or vibrator. * May be described as jhk.
Page 31: Viewing Display
Viewing display The current state can be checked by the icon appearing on the screen. : Unreceived i-mode mail, MessageR or : Communication using handsfree-compatible MessageF exists in Data Center device in progress P58 : Speakerphone function in use P51 : Displaying SSL page/Executing SSL session : Power saving mode activated P87 with i-αppli or using i-αppli downloaded from SSL...
Page 32 : Answer machine ON/recorded messages : Displaying available multi-cursor key in (blue)/ (gray) : microSD card installed or not full P61 Focus mode P38 during microSD mode : Lock on close/Auto keypad lock ON P106 (blue)/ (gray) : microSD card installed or not : Keypad dial lock ON P101 : Alarm clock ON P287 during MTP mode...
Page 33 Task area : Movie/i-motion : Chara-den The icon indicating the function (task) in progress appears in the task area. During : Melody Multiaccess or Multitasks, the icons show which functions are running. (blue)/ (gray) : Accessing microSD card/Standing by for accessing : Activating Music&Video Channel Task area : Music&Video Channel program obtaining...
Page 34: Sub-Display/Light Overview
Guide area indicates that there are items that can be selected above and below the cursor Operations that can be performed by pressing m, I, g, C and a are displayed position. Press j to move the cursor. When d is pressed on the last item of in the guide area.
Page 35 ❖ Icons and states indicated on the sub stand-by screen : Missed calls exist (with 2in1 in Dual mode, appears when there is a missed call only to Number B and appears when there are missed calls to both Number A and B) : Recorded messages exist : Voice messages in Voice Mail service exist (with 2in1 in Dual mode, appears when there is a voice message only to Number B and...
Page 36 ❖ ❖ Displaying Multi information Selecting functions from the sub-display menu Multi information allows you to quickly check the information of missed calls, Using Sub-display menu, you can start Fake call, Music player, Mini-game, Start still recorded messages, unread mail (including MessageR/F), the number of steps in camera, Start video camera, Silent mode ON/OFF or Check new message.
Page 37: Selecting Functions From Menu
❖ Displaying light To switch the menu screen temporarily In each menu screen, you can temporarily switch to a different menu screen by the Turn on or blink in the cases below. operations below. You can also set which menu to display when pressing m on the - When receiving a call or mail, calling, obtaining ToruCa or accessing IC card stand-by display.
Page 38 ❖ ❖ Selecting menu items by keypad (Shortcut operations) Selecting menu items by multi-cursor key When numbers (item number) are assigned to menu items, a menu item can be <Example> Selecting "Calculator" selected by pressing the corresponding keypad (1-9, 0, *, #). meMove the cursor to "Accessory"eg Press the item number displayed with the preferred menu item.
Page 39 Selecting method of submenu Pulldown menu operation Move the cursor to the item to set and press g, and then press the keypads When "MENU" is displayed at upper-left of the guide area, various operations can corresponding to the item number. be performed with submenus.
Page 40: Using Motion Sensor
Displaying information quickly <Focus mode> ✔INFORMATION When moving the cursor to the icon for arrival information and press c for 1 second When the arrival information icon is displayed or when Info/calendar layout or or more, the icon disappears temporarily. For a voice message icon of Voice Mail Shortcut icons is set, press g on the stand-by display to change the display to service, a confirmation screen appears asking you to delete the display.
Page 41: Using Uim (Foma Card)
❖ Tilting FOMA terminal It may operate as double-tapping when lifting FOMA terminal with your hand. Enabling Motion sensor <Motion sensor> Rotating the screen display according to the orientation of FOMA terminal While displaying Full Browser screen, watching 1Seg, playing 1Seg video, playing m [Settings &...
Page 42: Security Code
Two security codes, "PIN code" and "PIN2 code", are set for UIM. UIM operation restriction is not set to data obtained via infrared communication, iC You can change the security codes yourself. P97 transmission, microSD card or DOCOMO keitai datalink or still images/movies taken with the built-in camera. UIM operation restriction The settings below are saved to UIM.
Page 43: Attaching/Removing Battery Pack
UIM (green/ white) and the terminals that support the service. Note that F-02A is available only in DOCOMO 3G roaming service area. To use the terminal in GSM service area, use the GSM compatible terminal.
Page 44 c With the label side of the battery pack upward, place the convex part of the Removing a Perform the procedure a-b of Attaching. battery pack to the concave part of FOMA terminal and plug in the direction of a, and fit it in by pressing in the direction of b and close the inner lid. b Pinch the tab of battery pack and pick it up in the direction of the arrow to remove.
Page 45: Charging
When a time available with each charging is reduced to about a half from that of The times below are the times for charging an empty battery pack with F-02A's a new battery, replacement of the battery is recommended because it is near the power switched OFF.
Page 46 ✔INFORMATION Power plug 100V AC Some i-αppli remains operating even when FOMA terminal is folded, consuming outlet power. In this case, the call, communication or stand-by time may be reduced. AC adapter During a call or communications, charging may not finish. Charging may not complete Light if you start battery charging while watching/recording 1Seg, playing movie/i-motion, obtaining Music&Video Channel program, activating Music&Video Channel player or...
Page 47: Checking Battery Level
FOMA terminal from the AC adapter, desktop holder or DC adapter then connect it again to start charging. Contact the sales outlet such as DOCOMO Shop if the light does not turn on for a while after charging starts.
Page 48: Turning Power On/Off
When FOMA terminal is folded, the message indicating low battery appears on The battery icon set by default varies by the color of FOMA terminal. the sub-display. With FOMA terminal folded, the reception level can be confirmed on the sub- display.
Page 49: Changing Screen Display To English
FOMA terminal is folded, the light (blinking) notifies you of unread mail. enter the date and time. With automatic correction set, the time is corrected when receiving the time information from DOCOMO's network in Japan or the time difference correction information from the telecommunications carrier used The next procedures P130 Step 2 and the following steps in "Displaying mail...
Page 50: Notifying The Other Party Of Your Phone Number
<When the correction has never been performed and date and time are displayed with "- ✔INFORMATION -" or "?"> If an announcement of requesting caller ID is heard when making a call, make a call Flash graphics etc. that use clock or date/time are not displayed correctly. Also, again after setting your caller ID to be notified.
Page 51: Voice/Videophone Calls
Voice/Videophone Calls Making a call/videophone call When you can/could not answer a voice/videophone call Videophone calls .................... Putting a call on hold when you cannot answer immediately Making a call/videophone call ..............Respond and Hold Switching a voice/videophone call during a call ........Using public mode ..................
Page 52 Making a call/videophone call : Videophone call switch available Videophone calls Making a call/videophone call Videophone function is available between terminals that support DOCOMO videophone. Enter a phone number (up to 80 digits) Videophone calls are only available at 64 kbps.
Page 53 - Make call from i-mode web page : You are not making videophone call after connecting to site Adjusting Listen volume during a call provided by IP (Information Provider) This setting applies to Listen volume in Adjust volume. - Upper limit exceeded. Connection failed. : Upper limit of a charging plan with a limiting During a voice call, j or SD function (Type Limit or Family Wide Limit) is exceeded If a videophone call accompanied with Chaku-moji is made when Auto redial as voice...
Page 54 Redial/Received calls Switching a voice/videophone call during a call Making a call using redial/received calls Switchable only from the caller. This is a function to record call logs (Redial) and received calls. This function is available among the models which support switching voice call Up to 30 items are recorded in each of Redial and Received calls.
Page 55 ❖ *1 If you directly enter "010" or dial from "010" saved in phonebook, the international Using Redial/Received calls call icon and "+" do not appear. Move the cursor to a partyem4e1 or 2e1 Adding to phonebook : *2 If recorded message is deleted, this icon changes to missed call icon. or 2 *3 May not appear when the call making/receiving date and time is not recorded etc.
Page 56 When using 2in1, up to 10 sent Chaku-moji are saved to Sent messages for For details of Chaku-moji or supported models, refer to NTT DOCOMO website or Numbers A and B, respectively; a total of 20 sent Chaku-moji are saved. Display "Mobile Phone User's Guide [Network Services]".
Page 57: Making A Call Under Set Conditions
❖ Sending tone signals (DTMF) during a videophone call 186/184 During a call, m0eEnter a number Setting caller ID to send/not to send for each call The number you pressed is displayed and the tone signal is transmitted. Caller ID is your important information. Carefully consider whether you want to c : Cancel sending include caller ID information when making a call.
Page 58: Making International Calls
Press 0 for 1 second or more to enter "+". of "WORLD CALL". * To use international call services except the DOCOMO service, contact the carrier for Omit "0" in area code (city code) starting with "0". The leading "0" is required details.
Page 59 ❖ ❖ Making international call by selecting international prefix Setting Auto assist setting number and country code You can save up to 3 items to be prefixed to a phone number when making international calls. You can select international prefix number or country code registered in Int'l call assist.
Page 60 ✔INFORMATION Sub address When a handsfree device is set to sound, the ring alert for incoming calls sounds from Setting Sub address a handsfree device regardless of settings of Silent mode or ring alert setting on FOMA terminal. You can set whether you can call a specific phone or communication device by When a handsfree device is set to sound, a call continues even when FOMA terminal is specifying a sub address.
Page 61: Any Key Answer
Press a instead of n or I to receive a videophone call with a substitute Any key answer image. Substitute image is sent to the other party when a videophone call is Pressing a dial key to answer call connected. When ending the call, f You can set whether you answer a call by pressing 0-9, g, *, # in addition to n.
Page 62: Respond And Hold
Setting Status message Priority comm mode You can record a status message up to approximately 10 seconds in your own Setting the priority screen for an incoming call voice. during another call m [Settings & NW services] 1161eSelect On-hold You can select the voice call or packet communication screen to be given priority tone fielde2 when data is received via packet communication from a connected PC during a Press 1 and C to restore preinstalled guidance.
Page 63: Public Mode (Drive Mode)
Incoming operations while using network services in Public mode (Drive Using public mode (Power OFF) mode/Power OFF) *25251en Voice Mail Service , Call Forwarding Service , and Caller ID Request Service take precedence over Public mode. Public mode (Power OFF) is set (No change on the stand-by display). *1 For voice call with ring time set to other than "0 second", a service starts after the status *25250en Canceling :...
Page 64: Playing/Deleting Record Messages/Voice Memos
When there is an incoming call with Answer machine active Setting the greeting message A call is received You can record a greeting message up to approximately 10 seconds in your own voice. When the response time set in Greeting msg resp time elapses, the greeting S (1 sec.
Page 65: Setting Image During A Videophone Call
While playing, elapsed playing time appears in the bottom of the screen. While playing, the operations below are available. j, SD : Adjust volume g : Stop n : Switch the speakerphone function ON/OFF Videophone call message is always played with speakerphone activated. You cannot turn off the speakerphone.
Page 66 Switching display magnifications <Zoom> Setting display during a call Pressing r switches the zoom scale in the following order, and pressing l The settings are retained after a call. switches in the reverse order. Switching cameras cancels the zoom. × Perform necessary operations during a call In-camera : Standard 2 ×...
Page 67: Datasession Arv. Act
Operation Notify switchable mode Changing videophone settings Setting for switching a voice/videophone call during a call You can set actions to be performed when videophone call fails, or set the screen to appear during a videophone call. You can notify the network that your terminal is available for switching voice and Auto redial as voice is provided to ensure access to the other party.
Page 68 Refer to the instructions manual of external devices for hardware requirements, setting or operating instructions of videophone applications. * You can use "DOCOMO Videophone Software" as an application supporting this function. This software can be downloaded from DOCOMO Videophone Software website. (For details such as the usage environment of a PC, refer to the support website.)
Page 69: Phonebook
Phonebook Phonebook available for the FOMA terminal ........................Adding to phonebook ........................Phonebook new entry Setting receiving actions for each phonebook entry ................Alert by contact Setting group .............................. Group setting Making a call from phonebook ......................Phonebook search Editing phonebook entries ........................Edit phonebook Copying phonebook entries ...............................
Page 70 Reading 32 one-byte characters 12 two-byte (25 one-byte) (@docomo.ne.jp) is omitted in the mail address and saved in the phonebook. If the characters × mail address is "mobile phone number@docomo.ne.jp", add it to the phonebook Image, Movie omitting "@docomo.ne.jp".
Page 71 Set required itemseC PostalCode/Address : Up to 7 digits for a postal code and up to 100 two-byte (200 one-byte) characters for an address can be entered. Phonebook number : The smallest phonebook number available is assigned. Company name : Up to 50 two-byte (100 one-byte) characters can be entered. When the phonebook number overlaps with an existing number, a Job title : Up to 50 two-byte (100 one-byte) characters can be entered.
Page 72: Making A Call From Phonebook
Group setting Phonebook search Setting group Making a call from phonebook You can call up the phonebook entry from FOMA terminal phonebook or UIM You cannot change a group name or set calling/receiving actions to " phonebook for the party to call. (No group)".
Page 73 ❖ 4eEnter phonebook numbereC Using phonebook entries Ph book No. search Zeroes before single- or double-digit phonebook numbers can be omitted. Creating an i-mode mail : Move the cursor to a partyea You can display the phonebook list in phonebook number order by pressing Creating SMS : Move the cursor to a partyea (1 sec.
Page 74: Editing Phonebook Entries
C and You cannot send a mail to the party whose address is saved as "mobile phone selecting "Yes". number + secret code@docomo.ne.jp". Check User information : Name, reading, group name and the first phone number/mail address are displayed in full.
Page 75: Secret Attribute
✔INFORMATION Delete phonebook For UIM phonebook, the phone number may not be overwritten when it contains " ". Deleting phonebook entries When multiple phone numbers or mail addresses are saved and the phone number or mail address in the first entry is deleted, the second or subsequent entry moves When deleting all, all of the created groups are deleted.
Page 76: Checking Number Of Phonebook Entries
No. of items Checking number of phonebook entries In Privacy mode (when Call & Logs is "Hide set contact"), the number of phonebook entries in FOMA terminal phonebook with secret attribute is not displayed. deSearch the phonebookem92 Quick dial Making a call with a few key operations You can make a call by a simple operation to parties with phonebook numbers 0- 99 in FOMA terminal phonebook.
Page 77 Sound/Screen/Light Settings Setting operations for incoming calls and mail/messages ....... Setting sub-display ..............Sub-display Setting display light ............... Display light Sounds settings Changing display colors ............Color scheme Changing sounds of ring alert, alarm sound, etc. . Ring alerts & Sounds Changing startup menu ..........
Page 78 MessageR alert/MessageF alert a#1e2 or 3eSet required itemseC Setting operations for incoming calls and mail/ messages Setting items P76 "Mail alert" This setting also applies to Call ring alert, Mail/Msg ring alert, Incoming call/ Chat mail alert Videophone receiving in Call image, Vibrate alert/effect and Light alert. a#14eSet required itemseC Music and movie/i-motion that can be set as ring alert or movie/i-motion that can be set for image display P217, 260...
Page 79 Call ring alert Select music to set When music in microSD card is selected, a confirmation screen appears. m [Settings & NW services] 111e1 or 2eSet Select "Yes" to move the music to the terminal and set to a ring alert. required itemseC Setting Point ring tone : Move the cursor to musiceaeSelect the item...
Page 80: Adjust Volume
Adjust volume Vibrate alert/effect Setting volume of ring alert, alarm sound, etc. Informing you of incoming calls and alarms by vibration m [Settings & NW services] 12e1-8 The vibrator for receiving 64K data communication operates according to the When Alarm volume is selected, additionally select 1-3. setting of incoming voice call.
Page 81: Keypad Sound
✔INFORMATION Charge alert It does not vibrate when receiving a call/mail during a call. Setting confirmation tone for charging Even with "OFF", the vibrator may operate when Flash graphics operate. You can set if you activate the battery charging sound at the start and end of Melody Call charging.
Page 82: Silent Mode
5e1 or 2 Setting Low battery alert : When activating 1Seg, a sound emission confirmation screen appears. Select "Yes" to adjust the volume. Select "No" not to emit a sound. Note that a sound is emitted if 1Seg activation is set to "Yes(Unconfirm)" in Sync TV start of Notify Silent mode start time for watching reservation.
Page 83: Stand-By Display
Displays/Lights settings Timed theme Stand-by display Switching stand-by display, Silent mode, etc. by Changing stand-by display lifestyles For some images, movie/i-motion, Chara-den or i-αppli, stand-by display settings are disabled if UIM used when downloading them is not installed (UIM operation This function allows you to change the stand-by display or activate Silent or restriction).
Page 84: Info/Calendar Layout
❖ Operations on stand-by display Setting i-αppli stand-by display The operations below are available for movie/i-motion. Only i-αppli compatible with the i-αppli stand-by display can be set. f /Opening FOMA terminal : Play The i-αppli stand-by display precedes other stand-by display settings. c / f : Stop Operating i-αppli stand-by display P239 SD : Adjust volume while playing...
Page 85 2eSelect informationeC Setting arrival information : Schedule "When selecting " Unread messages", reception date/time and titles of Icon, Start time, contents/program name appear in the order of the date and time of unread mails appear. schedule or watching reservation/recording reservation of 1Seg that start date/time When selecting "...
Page 86 ❖ ❖ Outgoing call image priority Incoming call image priority When setting outgoing images in multiple functions, they are displayed in order of When setting incoming images in multiple functions, they are displayed in order of the priority below. the priority below. a Image saved in FOMA terminal phonebook a Image saved in FOMA terminal phonebook b Alert/image by group of FOMA terminal phonebook...
Page 87 Identification mark Sub-display Decorating titles to display for incoming/ Setting sub-display outgoing calls or while talking Stand-by image This setting also applies to Number A of Identification mark of 2in1. m [Settings & NW services] 2811e1 or 2 Identification mark does not appear when using Multi Number. m [Settings &...
Page 88 m [Settings & NW services] 284e1 or 2 When setting to "Software" for i-αppli, the light turns on according to the i- αppli settings. The power saving mode does not operate for i-αppli set to Charging image Always on. You can set the image to be displayed on the sub-display while charging. Light Area m [Settings &...
Page 89 Power saving mode Saving battery consumption Using Kisekae Tool Use of Kisekae Tool allows to collectively set stand-by display image, menu icons, Saving mode ON/OFF incoming/outgoing call images, ring alerts, etc. Kisekae Tool in "Preinstalled" folder cannot be moved or deleted. Also, the file m [Settings &...
Page 90 Changing Kisekae Tool : i-αppli unavailable due to UIM operation restriction. (upper half is gray) : Partially downloaded m [Data Box] 6 m6eAuthenticatee"Reset all" or "Reset menu" Resetting : Selecting "Reset all" resets Kisekae Tool settings to the default state. i-mode : Kisekae Tool downloaded from sites Selecting "Reset menu"...
Page 91: Sound/Screen/Light Settings
❖ Using Special mode ✔INFORMATION Select language cannot be set when using "Simple Menu". If you set to Special mode, "Moimoi" is added to "Preinstalled" folder, and For items set to "Kisekae Tool" in each setting screen, when selecting other than automatically set for Kisekae Tool.
Page 92 Changing icon and background of Basic menu Style theme Customizing FOMA terminal screen When the display menu is Basic menu, you do not need to press I. You can make 3 types of original coordinates by changing the screen designs such as stand-by display, menu, Clock, battery icon, antenna icon or Sub-display pattern.
Page 93: Light Alert
Battery icon/Antenna icon Light alert Changing battery/antenna icon Setting the lighting patterns and colors used for an incoming call/mail or while talking m [Settings & NW services] 21e3 or 4e1-6 This setting also applies to Light alert of Call alert/Videophone alert, Light alert of When setting Special mode, select from among 1-7.
Page 94 Changing a setting : Select a setting to changeeSet the stand-by animated Time tone noticeeC Setting time tone Set the stand-by animated noticeeC Specified time is notified by displaying the sub-display or using light. You can also When "Avatar" is set, the avatar set for the phonebook is displayed as an set it to emit a sound.
Page 95: Font Size
Clock layout : Set the position to display the clock. Font size In All lock or Omakase Lock, the clock is displayed at the "Top" regardless of Changing font size this setting. Day : Set if you use Japanese or English to display the day of the week. m [Settings &...
Page 97: Security Settings
Security Settings Security code Security code used on the FOMA terminal ........................Changing terminal security code ................. Terminal security code change Setting PIN code .................................. Unblocking PIN/PIN2 code ..............................Restricting mobile phone operations or functions Restricting others from using ..........................All lock Using Omakase Lock ..........................
Page 98 Services. You can set any number at subscription and optionally change it later. several types of security codes such as network security code for network services If you have "docomo ID/Password" for "My docomo" that is a total support site for and i-mode password. Use these codes appropriately for FOMA terminal.
Page 99: Setting Pin Code
4 digits of the phone number and take care not to let others know the terminal security code. Also, keep a separate note of the set security codes. * Note that DOCOMO is not liable for any damages caused through incorrect use of the data by a third ❖...
Page 100: Restricting Others From Using
Enter the current PIN/PIN2 codeeEnter a new PIN/PIN2 code in New PIN/PIN2 code entry fieldeEnter the new PIN/PIN2 code in To make an emergency call (110, 119 or 118) in All lock, enter the emergency call number on the stand-by display and press n. New PIN/PIN2 code - check fieldeC * The emergency call number entered on the terminal security code entry screen is marked with If the PIN/PIN2 code was not correctly entered, a screen indicating the failure...
Page 101: Omakase Lock *1
"General Inquiries" on the back of this manual. interruption or during interruption, or if you are the member of docomo Premier Club, no charges occur. And, if you subscribe to Keitai Anshin Pack, you can use the service within the Self mode fixed charge of Keitai Anshin Pack.
Page 102 *3 Data transfer in infrared communication/iC transmission or using USB connection is Personal data lock unavailable. Disabling to use personal information *4 Search by function with restriction is unavailable with Personal data lock ON. *5 The information of the Scheduler is not displayed on the calendar set for stand-by display. You can temporarily restrict use of i-mode, mail, personal information, etc.
Page 103: Prohibiting Keypad Dial
Keypad dial lock Privacy mode Prohibiting keypad dial Setting operations for using or displaying personal information You can set so that calls cannot be made without using phonebook. You can make emergency calls (110, 119 or 118) even if Keypad dial lock is Set operations for using or displaying personal information and reflect secret activated..
Page 104 Setting Privacy mode operation Silent receive act. : Set the incoming operation when setting Private call act. to "Silent receive". And, even if each function is set, it is not notified by ring alert, If selecting "Authorized access", authentication is performed when using a set vibrate alert, light alert or sub-display.
Page 105 ❖ When Privacy mode is activated ✔INFORMATION If Schedule is set to "Authorized access", watching 1Seg/recording reservation are also There are restrictions as below depending on the contents set by the items of included. Privacy mode. If i-motion is set to "Hide secrecy album", titles in playlist are not displayed when <Except i-αppli : "Authorized access">...
Page 106 When Personal data lock is activated with Private call act. set to "Silent receive" <My Picture : "Authorized access"> and Silent receive act. set to "Start Ans. Machine", Answer machine does not Still images or movies with frames cannot be shot. operate, and incoming operation is performed as "Keep receiving"...
Page 107 Hiding mail whose senders/receivers with secret ✔INFORMATION attribute set in phonebook <Contact setting> Browser history of i-mode and full browser do not display other browser histories than those in Privacy mode. When performing Contact setting after secret attribute of a phonebook entry is If all items except Incoming: privacy mode and Auto start are "Show all", Privacy mode changed or mail received via data communications is saved to FOMA terminal, is not activated.
Page 108 Receive display option Side key hold Setting display contents for receiving call/mail Preventing inadvertent operation of side keys This function disables operations using T and SD while FOMA terminal is folded You can set the displaying contents (name, phone number, etc.) on the display or sub-display when receiving a call or mail from a party saved in phonebook.
Page 109 FOMA terminal is folded. - 64 K data communication with a PC , data transfer using DOCOMO keitai datalink *1 Actions when Close setting is set to other than "End the call" or the earphone/microphone Setting Auto-keypad lock to "ON"...
Page 110 Restricting calls/mail/data transfer ✔INFORMATION When Lock on close/Auto keypad lock is "ON", Lock on close/Auto keypad lock is Accepting/Rejecting calls from specified phone activated after the power is turned OFF and ON. Lock on close/Auto keypad lock is activated after Omakase Lock is canceled if active. numbers If Lock on close is already activated, Auto keypad lock is not activated even if it is set.
Page 111: Anonymous Caller
Enabling Accept/Reject call from specified numbers When "Music" is set, select music data and set an image for "Show image". Setting Music P77 <Specified caller> Show image : Set an image for incoming calls without caller ID. This setting applies to all phone numbers with Accept/Reject call set. When "i-motion"...
Page 112: Unregistered Caller
No packet - Public mode, Answer machine communication fee is charged for the broadcast mail. With a PC (My docomo), - Voice Mail Service, Call Forwarding Service more convenient uses are available.
Page 113 Storing (updating or restoring) phonebook in Data Storing (updating or restoring) data in Data Center Center You can save images and mail saved in FOMA terminal to Data Center. Up to 10 images or mails can be stored in one operation. To update i-mode mail attachments are deleted when the mail is saved.
Page 114 Checking used log <Synchronization log> Delete all data Logs saved in Data Center can be checked. Deleting saved data all at once Up to 30 synchronization logs can be recorded. When the maximum is exceeded, Delete the saved or registered data, and restore the settings of each function to older logs are overwritten first.
Page 115: Other Security Settings
Other security settings In addition to those introduced in this chapter, you can use the functions below and services related to Security settings. Function/Service Page IC card lock Prevent unauthorized use of IC card function. P246 Nuisance Call Blocking Service Reject "Nuisance Call"...
Page 117: Mail
Mail i-mode mail ....................Useful functions of Mail Using mail logs ................Mail logs Creating i-mode mail/Deco-mail Useful functions of Mail ................Composing and sending i-mode mail ......Compose message Creating and sending Deco-mail ..........Deco-mail Setting Mail Creating and sending Decome-Anime ......Decome-Anime Setting mail function of the FOMA terminal ......
Page 118 To send mail to another i-mode terminal, "@docomo.ne.jp" can be omitted. Select the subject fieldeEnter the subject (up to 100 two-byte (200 i-mode mail one-byte) characters) Only by subscribing to i-mode, i-mode mails can be exchanged not only with i- The whole title may not be received depending on the receiving terminal.
Page 119 Error messages for address unknown etc. may not be received when mails are sent to Deco-mail addresses other than DOCOMO. Creating and sending Deco-mail When the memory space of Outbox/Unsent messages is not enough or when exceeding the savable number, i-mode mail cannot be created or sent. Delete You can create Deco-mail by changing the text font size or background color, unnecessary i-mode mail and/or SMS from the folder of Unsent messages.
Page 120 ❖ Entering characters after specifying decoration Operating procedures of decoration selection screen Select the message text field on the mail creation screen Function Operating procedure/supplement aeSelect a decoration iconeDecorate Font color Select a font coloreEnter characters Select from 20 default colors or 64 colors of "Other color". The pictogram font colors can also be changed (except for Deco- mail pictogram (Pictogram D)).
Page 121 Specifying decoration after entering characters Decome-Anime Creating and sending Decome-Anime Select the message text field on the mail creation screeneMove the cursor to the start point of decoratione* (1 sec. or more) Decome-Anime is an expressive mail service using Decome-Anime template, and Select the end point using Flash graphics with messages or images inserted.
Page 122 Select Decome-Anime template ✔INFORMATION When inserting an image or text, some extra bytes are added because the size is The list of components of text or image that can be edited are displayed. calculated after the composition. Therefore, Decome-Anime may not be previewed or Icon definitions are as shown below.
Page 123 On the mail creation screen, m63e"Yes" Select a mail template On the mail details screen, m45 When selecting "Load & Insert" in Step 1, if there are characters already Saving sent/received i-mode mail : entered in the text, select the insert position and select "Yes". Set required items Edit the maileC Display name : Up to 10 two-byte (20 one-byte) characters can be entered.
Page 124 Downloading Decome-Anime template Attachment (sending) The maximum savable size of each Decome-Anime template is 100 Kbytes. Attaching a file Display a siteeSelect a Decome-Anime template You can send i-mode mail with files attached. Pressing C while downloading : Stop downloading Up to 10 files of up to 2 Mbytes in total can be attached.
Page 125 *3 Files may not be attached to the mail even when replay restriction is not set. ✔INFORMATION *4 ToruCa (Details) may not be received even if the receiver's device is compatible with ToruCa. Attachments not supported by the receivers' terminals may be deleted or may not be On the mail creation screen, select the attachment fieldeSelect a displayed/played correctly.
Page 126 Automatically sending mail from a place where radio Editing sent/unsent mail waves reach <Auto-send> ae4 or 5eSelect a folder You can set so that i-mode mail created out of service area is automatically sent For SMS, appears. when moving to a place where radio waves reach. Select a mail Up to 5 mails can be registered.
Page 127 Receiving and handling i-mode mail ✔INFORMATION Mail auto receive When multiple mail and/or MessageR/F are received at the same time, the terminal When you receive i-mode mail operates depending on the conditions set for the mail or MessageR/F received last. Up to 100 Kbytes of i-mode mail including its attachments can be received Receive an i-mode mail automatically.
Page 128 Operating WEB Mail Check new message To send or receive mail from/to address B of 2in1, you need to connect to WEB Mail Checking new i-mode mail site. Only when 2in1 is in B or Dual mode, you can connect to the WEB Mail site. You can make inquiry for any i-mode mail delivered while you were out of service 2in1 is a charged service requiring subscription.
Page 129 Edit the maileC ✔INFORMATION When the link item that can activate the melody or i-αppli attached in the received The senders mail address or phone number of the received mail is entered in message text, it is not set to forwarded mail and is not quoted as characters. the receiver field, the subject of the received mail is entered in the subject field Files prohibited to be attached to mail or output from FOMA terminal are not attached with "REX:"...
Page 130 Read mails may be deleted when downloading a Receive option attachment file of a Playing i-motion attached to a mail on a PC requires i-motion compatible software. For certain size. details, refer to NTT DOCOMO website. When downloading interrupts because of out of service area etc., resuming Saving confirmation screen appears.
Page 131 <Example> Saving ToruCa Checking file name a1eSelect a foldereSelect an i-mode mail a1eSelect a foldereSelect an i-mode mail Move the cursor to a file nameem63 Move the cursor to a file nameem62 m44eSelect the image Saving image of Deco-mail : Checking the title of the attached melody : Move the cursor to the The next procedure P162 Step 2 and the following steps in "Downloading...
Page 132 Operating Inbox/Outbox Folder list screen Displaying mail in inbox/outbox/unsent mailbox Received/Sent/Unsent i-mode mail, SMS or Message R/F can be checked. " (Recommended) BEST ", " (Early warning "Area Mail" information)", "Welcome (Decome- Anime) " mail are saved in Inbox. Communication charges are free for Inbox folder list screen Outbox folder list screen a Usage rate of the memory space...
Page 133 Mail list screen : Area Mail to be used in Message i-αppli d Sender/Receiver When saved in phonebook, the name is displayed. For Area Mail, "Area Mail" appears. e Received/Sent/Saved date & time The time is displayed on the reception day and the date is displayed on other than the reception day.
Page 134 Sent mail ✔INFORMATION No icon : Unprotected : Protected Characters that cannot be displayed are replaced with spaces or other characters. c Type of attachment/SMS/Area Mail When the subject exceeds the maximum number of characters that can be received, the : Image : i-motion : Melody...
Page 135 <Example> Creating folders Searching for mail ae1 or 4-5 You can search for mails by sender/receiver in the received/sent mail or the sent/ received date saved in phonebook. ae1 or 5 Deleting : Move the cursor to a folderem2eAuthenticatee"Yes" m9e1 or 2eSearch for a phonebook entry or a date Changing folder setting : Move the cursor to a folderem3 Move the cursor to a foldereme7 or 8...
Page 136 If SMS or Area Mail is included, as the beginnings of message are displayed in the list Deleting mail screen, the result of sorting by "By title" does not match the order of the Japanese ❖ syllabary. Deleting received mail Changing read/unread state of received mail Read/Unread state of received mails protected cannot be changed.
Page 137 Useful functions of Mail * May not be displayed when sending date/time is not recorded etc. Mail logs Displaying received message logs : Using mail logs ❖ Using mail logs This function is used to record the destination, sender's address of sent/received Creating an i-mode mail : Move the cursor to a logea mail as mail logs.
Page 138 Useful functions of Mail phone number in phonebook, calls can be made (for SMS or mail that the address is "phone number@docomo.ne.jp", a call can be made without saving). Copying texts ae1 or 4-5eSelect a foldereMove the cursor to a You can copy characters in mail.
Page 139 If the specified mail address is i-mode terminal, it is sorted even if it is i-αppli sorting method precedes. specified with the domain (@docomo.ne.jp) omitted. However, if the address Sent/Received mails are not sorted. is "Phone number @docomo.ne.jp", add only the mobile phone number ❖...
Page 140 Select a priority level Setting mail signatures A new method is added to the selected row. ❖ Setting whether to insert signature automatically To add the first method, select "Add last". Methods are sorted sequentially from the one with the highest priority level. You can set if you automatically insert the signature when composing, replying or When registered methods are changed, "Move to last"...
Page 141 Adding mail group Setting a quoting method in reply <Reply format> By registering multiple mail addresses in a mail group, i-mode mail can be sent to You can set if you quote the body of the message when replying to an i-mode mail multiple receivers by a simple operation.
Page 142 Setting display style of mail list Setting playing method of melodies or sound effects <Attachment auto-play> You can set the style to display a list of Inbox/Outbox mails. a#65eSet required itemseC You can set whether to play melody attached to message text or sound effect of Flash graphics automatically when displaying i-mode mail or MessageR/F.
Page 143 Changing font size Using Message Service Receive MessageR/F You can select a font size from 5 types to display mails. When MessageR/F is received The font size for Deco-mail pictogram (Pictogram D) is not changed. ae1 or 5eSelect a foldereSelect a mail Receive MessageR/F …...
Page 144 Displaying MessageR/F automatically <Auto-display> ✔INFORMATION When multiple mail and/or MessageR/F are received at the same time, the terminal You can set if you display the contents (for about 15 seconds) when the screen operates depending on the conditions set for the mail or MessageR/F received last. returns from the reception result screen to the screen prior to the reception.
Page 145 MessageR/F list/details screen Displaying/Saving attachment <Example> Saving Display the list of MessageR/F Icon definitions P143 "MessageR/F list/Details screen" Select MessageR/F with an attached file Move the cursor to a file nameem52 The next procedure for image P162 Step 2 and the following steps in "Downloading images"...
Page 146 Using early warning "Area Mail" Receive Area Mail Early warning "Area Mail" When receiving early warning "Area Mail" This is a service that you can receive emergency earthquake flash report etc. When receiving Area Mail of Earthquake Early Warning delivered by the Meteorological Agency. Area Mail can be received even if you do not subscribe to i-mode.
Page 147 Using Chat mail Area Mail Creating and sending chat mail Setting early warning "Area Mail" Creating and sending chat mail Mail can be sent and received to/from multiple addresses like making conversation Setting if you use Area Mail <Receive setting> on one screen.
Page 148 On the Chat mail screen, m8eSet the required itemseC When mail is sent or received while staying overseas (except GMT+09:00), may appear. Nickname : Up to 4 two-byte (8 one-byte) characters can be entered. c Message text "Myself" appears when no nickname is entered. Adding chat member <Chat member setting>...
Page 149 ❖ Receiving chat mail <Receiving chat mail> Checking for chat mail ❖ You can make inquiry for any chat mail delivered while you were out of service area, When Chat mail is not activated the power was turned OFF or other cases. At this time, if the i-mode Center stores i-mode mail, it is received at the same time.
Page 150: Composing And Sending Sms
SMS can be sent to or received from parties using overseas service providers to display them correctly. If you use pictograms, is replaced with , and each of except DOCOMO. For the service areas and overseas service providers, refer to pictograms except is replaced with a space. NTT DOCOMO website.
Page 151 Perform Check new SMS. Mail ring alert sounds, the light turns on or blinks, and the reception result When SMS is received from parties of overseas service providers except DOCOMO, "+" screen appears. is prefixed to the mail address of the sender. When the phone number with prefix "+"...
Page 152: Setting Sms
When "0 day" is set, SMS is deleted from SMS center after resending of it is Displaying SMS of UIM repeated for a certain period of time. SMSC : Select when using SMS services except DOCOMO. a91e2 or 3 When setting to "Others", enter a mail address of up to 20 one-byte characters in Address field.
Page 153 e Top of the message Moving/Copying SMS in UIM to FOMA terminal : a Move the cursor to SMSem3e1-4 Read/Unread icon in the list indicates whether SMS in UIM was displayed. The state of read/unread before moving/copying is also carried over. To move/copy selected items, select themeC.
Page 155: I-Mode/I-Motion/I-Channel
i-mode/i-motion/i-Channel i-mode ....................................Displaying a site Displaying a site .................................. Viewing and operating sites .............................. Using My Menu ..............................My Menu Changing i-mode password ....................Change i-mode password Displaying websites ..........................Go to location Saving web pages or sites for quick access ....................Bookmark Saving site contents ...........................
Page 156: I-Mode
Displaying a site i-mode Displaying a site With i-mode, you can use online services such as site (program), Internet or i-mode You can connect to i-mode to view various sites. mail by the display of i-mode compatible FOMA terminal (hereinafter called as i- mode terminal).
Page 157 ❖ Connecting to FirstPass compatible page ✔INFORMATION Returning to iMenu during site display : m1 Select the User Certificate to sendeEnter the PIN2 code When the serial number of your mobile phone/UIM is required from the website, a confirmation screen for sending appears. When "Yes" is selected, the serial number of The user certificate is sent and the FirstPass compatible page appears.
Page 158: Viewing And Operating Sites
Returning/proceeding the pages : A storage area in the terminal that temporarily stores the display history of pages is Viewing and operating sites called "Cache" and up to 20 items are recorded. Pages recorded in cache can be displayed without communicating by h. The basic operations available during a site display are explained below.
Page 159: Using My Menu
Displaying Flash graphics My Menu Flash graphics can be displayed on FOMA terminals. Flash graphics enhances the Using My Menu expressive power of the site. You can register frequently accessed sites in My Menu, which allows you to quickly Flash graphics are not displayed when Set image display of Image & Effect is "Not access the site next time.
Page 160: Changing I-Mode Password
Be careful never to reveal your i-mode Select the URL of website password to others. If you forget your i-mode password, it is reset to "0000" at the DOCOMO Shop Deleting : Move the cursor to a URLem4e1-3e"Yes"...
Page 161: Saving Web Pages Or Sites For Quick Access
Deleting : Move the cursor to a bookmarkem3e1-3e"Yes" Bookmark To delete 1 item, move the cursor to a bookmark. Saving web pages or sites for quick access To delete selected items, select themeC. To delete all items, authentication is required. You can register frequently visited websites in Bookmark and thereafter display If you delete a bookmark registered as Access shortcut, Access shortcut is them simply by selecting bookmarks.
Page 162: Saving Site Contents
Connecting to sites or websites using simple key For the bookmark of Full Browser registered as access shortcut, appears on the access shortcut list. sequence <Access shortcuts> ✔INFORMATION When registering a bookmark as access shortcut, you can quickly display the site or A bookmark of Full Browser can be displayed on Full Browser using Access shortcuts website from the stand-by display.
Page 163: Downloading Data From Sites
Displaying screen memo Downloading data such as images and melodies from sites Downloading data from sites Icon definitions You can download data (files) from sites and store them in FOMA terminal. : Ordinary screen memo : Protected screen memo The data (file) and the maximum size of each data that can be saved are as shown The bar indicating the usage rate of the memory space appears at the top of below.
Page 164 Set required items Downloading data Some items cannot be changed depending on images. Data that can be downloaded and the saving destination are as described below. For images that cannot be attached to mail or output from FOMA terminal Save to ("File restricted"...
Page 165: Uploading Image Or Movie/I-Motion To Sites
Useful functions of i-mode ✔INFORMATION When downloading of Kisekae Tool is stopped or communication is interrupted, a Useful functions of i-mode confirmation screen for resuming it may appear. When "No" is selected, a confirmation screen for partial saving appears when it is available. The rest of partially saved data Some functions may not be used in certain sites or websites.
Page 166: I-Mode Settings
Copying URL Adding URL to phonebook You can copy URL from the currently displayed site, website or screen memo. You can register URL from bookmark list, Screen memo list, etc. Copied characters can be pasted in the fields in the mail creation screen or <Example>...
Page 167 You can connect to the various providers (ISP) by changing the host of i-mode select "Yes", the program setting information is received and the program can be terminal of DOCOMO. Packet communication fee is charged for the ISP connection obtained automatically.
Page 168: Operating Certificate
When "Display" is set, Animation and Use phone information can be set. DOCOMO Cert : A certificate required for connecting to FirstPass center or Animation : Set whether to display GIF animation. FirstPass compatible sites. It is saved in the UIM by default.
Page 169 If UIM is misplaced or stolen, contact the phone number for "General Inquiries" on the back of this manual to have the user certificate nullified. In any circumstances DOCOMO assumes no obligation nor responsibility for sites and information provided by FirstPass compatible sites. Any issue that arises must be settled between you and the FirstPass compatible site concerned.
Page 170 Downloading original certificate Skipping password entries <Skip password> You can save up to 5 items for original certificate, up to 10 items for route To use an original certificate, enter terminal security code for authentication. You certificate and intermediary certificate in total, and they should be up to 35 Kbytes can set whether to skip entry of terminal security code to reuse the original in total.
Page 171: I-Motion
Using i-motion The operations below can be performed when playing i-motion that can be played while being downloaded. After completion of playing, the i-motion i-motion can be operated in the same way as i-motions to be played after downloading all data. You can save and play downloaded movie and sound from a site or website.
Page 172: Setting Whether To Play I-Motion Automatically
When i-motion is played while the data is being downloaded, it may become unable to And, there are 2 types; the one is "Basic Channel" provided by DOCOMO and the play, or image may be blurred depending on radio wave conditions. i-motion can be other is "Okonomi (Favorite) channel"...
Page 173: Setting I-Channel Ticker
✔INFORMATION Reset i-Channel While receiving information, keeps blinking. Resetting i-Channel When information is received, none of the ring alert, vibrator, light operates. In the cases below, when the i-Channel list appears by pressing c on the stand-by You can reset i-Channel to default states. display, the latest information is received and a ticker appears.
Page 175: Full Browser
Full Browser Displaying web pages designed for PC ...................... Full Browser Setting Full Browser ................................
Page 176: Displaying Web Pages Designed For Pc Setting
 Flash animation of Flash graphics supports up to 1 Mbyte per item, and Flash Video Full Browser supports up to 10 Mbytes per item. Displaying web pages designed for PC Files of up to version equivalent to Flash8 are supported. Note that, even a file in appropriate version may not be played depending on websites.
Page 177 ❖ m851 Operating on Full Browser screen Switching character encode : Each time you press these keys, character code is changed as SJIS EUC JIS Press any of k or 2, 4, 6, 8 Scrolling : UTF8. Press m852 to switch to "Auto switch". Press 2, 4, 6 or 8 to scroll the screen by pages or keep pressing Playing animation from the beginning by Retry : them to continuously scroll.
Page 178 The display of the pointer is switched as shown below by operation. Searching the character string on website : Displaying pointer : Selecting link Available only on the vertical display. : Obtaining data : Selecting link while obtaining data On Full Browser screen, 0eEnter characters in the search field : Selecting text box : Drag mode ON ❖...
Page 179: Setting Full Browser
When setting Cookie to Valid, information such as date/time or number of times When "Valid" is set, select Window open guard field. of displaying the website is sent. DOCOMO assumes no responsibility if your When Window open guard is set to "Invalid", a confirmation screen for information is known to a third party by this.
Page 181: Camera
Camera Before using camera ................................Shooting still images with Camera ......................Still camera Recording movies with Camera ........................ Movie camera Recording voice with Sound recorder ....................Sound recorder Setting image size and saving method of still images/movies ....Still image settings/Recording settings Changing settings for shooting ............................
Page 182: Before Using Camera
Precautions for using camera Though the camera is manufactured using extremely accurate technology, some Before using camera pixels and lines may always be displayed to be lighter or darker than you expect. Shutter sound is emitted even when "Silent" is set for volume settings or in Silent Images shot under very low light intensity contain increased noise such as white mode or Public mode.
Page 183 When FOMA terminal is folded, press T for 1 second or more during shooting Icon name Icon name stand-by to end the camera. a Shooting setting guidance P189 b Determination of up side P188 Still image/Movie files c Slider (Zoom) P187 d Face detection frame P188 : Maximum zoom : Standard...
Page 184 For Continuous (Auto) or Continuous (Manual) Still camera Each time you press I, a single image and thumbnails toggle. Shooting still images with Camera When a single image is displayed, pressing h switches to previous or next still image. This function can also be activated from the sub-display menu. Only a single image shot with Continuous (Manual) is not displayed in thumbnails.
Page 185 m31eEnter the titleeC Changing the title : ✔INFORMATION Up to 31 characters can be entered (up to 30 characters for continuously shot Saving shot still images takes time for some image sizes, quality or the destinations to images). save. × ×...
Page 186 Canceling : Settings of continuous shooting are different between in-camera/out-camera. Setting continuous panorama shooting Setting continuous shooting and 4 frames shooting 2-8 still images continuously shot by changing the direction of the camera little by Still images can be shot continuously. little can be formed to 1 still image by connecting them horizontally or vertically.
Page 187 You can set from an icon on the screen. P189 When restricted size or time is exceeded, shooting/recording ends. Time is In the lower left of the guide area, when is displayed, the image is limited to 180 minutes when Codec type is set to "Video + Voice" or "Video connected horizontally, and when is displayed, the image is connected only"...
Page 188 Switching the saving destination between FOMA terminal and microSD card : Still image settings/Recording settings Setting image size and saving method of still For a file whose size is 2 Mbytes or smaller, the saving destination can be switched. images/movies m6e1 or 2 Displaying the list of saved movie : The functions that can be set differ between still image and movie.
Page 189 While a saving confirmation screen is displayed on the sub-display, the light For movie recording, magnification is displayed above or right of the slider. turns off when no keypad operation is performed for approximately 3 When FOMA terminal is folded Press SD to zoom out/in.
Page 190 When setting to "ON", appears. Changing orientation of still image <Sense orientation> Switching full–screen and standard screen modes The orientation of still image to be saved changes automatically according to the orientation of FOMA terminal. In full–screen mode, icons and the guide area are not displayed. You can switch only when Sense orientation is set to "ON"...
Page 191 Switching Compatible mode ON/OFF ✔INFORMATION Below the shooting mode list displayed when m1 is pressed on the shooting When setting to "ON", you can record a movie that can be played regardless of the screen, a description of the shooting mode at the cursor position appears. model of FOMA terminal.
Page 192 ❖ Reducing camera shake During movie recording When file size reaches the limit value, recording ends. : Automatically reduce camera shake : Setting canceled None : No restriction for file size. Note that there is a restriction for the time for ✔INFORMATION recording at a time.
Page 193 Adjusting flicker Adjusting flicker can suppress the flicker phenomena which cause flickering or Sending still image shot during call fringe patterns on the screen under light such as fluorescent lights. Even with the saving destination set to "microSD" in Still image settings, images On the shooting screen, m23e1-3 are saved to FOMA terminal.
Page 194: Bar Code Reader
Such code is "4942857315721" " (NTT DOCOMO, INC.)" easily recognized when Auto focus is used or FOMA terminal is brought close to the center of the code until it is focused.
Page 195 Move out-camera to the code Connecting site or Internet website : Select a URLe"Yes" Press I to connect with Full Browser. The code is scanned automatically. A confirmation sound is played when Registering URL as bookmark : scanning is complete and the scanned data appears. a Move the cursor to a URLem33 : Scanning Select "Add bookmark"...
Page 196 Using the scanned data saved m [LifeKit] 1eC Select the scanned data Using scanned data P193 Step 3 in "Scanning codes" Deleting scanned data : Move the cursor to the scanned dataem3e1 or 2e"Yes" Authentication is required to delete all items. ✔INFORMATION A data file is named as scanned date/time + file number + extension.
Page 197 1Seg 1Seg ...................................... Before using 1Seg ................................Setting channels .................................. Watching 1Seg ............................Activate 1Seg Using i-αppli program guide .............................. Using Data Broadcasting ........................Data broadcasting Using TV link ................................TVlink Managing TV link ................................Recording 1Seg ............................Recording 1Seg Setting timer for watching or recording 1Seg program .....
Page 198 Radio waves 1Seg is one of the broadcast services and a different type of radio waves (airwaves) 1Seg from that of FOMA service is received. Therefore, regardless of whether you are in 1Seg is a terrestrial digital TV broadcasting service that allows mobile devices to or out of FOMA service area, it cannot be received where airwaves do not reach or receive broadcasted data along with images and sounds.
Page 199: Before Using 1Seg
Creating by automatic search : "Auto setting"e"Yes"eSelect an area Note that DOCOMO assumes no responsibility whatsoever for any loss or modification Auto setting starts, and upon completion, a confirmation screen for saving of saved contents resulting from malfunction, repair or other handling of FOMA appears.
Page 200: Activate 1Seg
✔INFORMATION ✔INFORMATION It takes approximately 60 seconds to search for channels in Auto setting. It may take While watching 1Seg, operations below are unavailable for the currently active longer time depending on the number of broadcasting stations and airwave conditions. Channel list.
Page 201 Reading and operating screen Operation to switch is available only on the vertical display. f Time shift play When going outside broadcasting service area while selecting a channel, a black : In time shift play screen is displayed for both video and data broadcasting. : In time shift ordinary play/fast forward play g TV station name (currently selected)/Program name (station selection finished) <Standard screen>...
Page 202 ❖ Switching watching screen *3 Searching channels, after you move etc., may enable you to receive waves from a broadcasting station that is not saved. When you cannot receive waves, the previously When Motion sensor is "ON", you can watch 1Seg on the vertical display when the watched channel reappears.
Page 203: Using Data Broadcasting
❖ Time shift function When a voice call or videophone call is made/received while watching 1Seg, the Using i-αppli program guide program is automatically recorded from that point, and you can watch it after the call. You can activate 1Seg watching and make a watching reservation or recording Time shift record is available in approximately 3 minutes, and it always keeps the reservation from Program guide.
Page 204: Using Tv Link
TVlink Using TV link Managing TV link For some data broadcasting and/or data broadcasting site, site and memo You can move or delete TVlink or organize them using folders. Up to 20 folders can information can be saved in TVlink. The site or memo information saved in TVlink be created.
Page 205: Seg Recording
✔INFORMATION Recording 1Seg When the memory space is not enough or exceeding the savable number, recording is Recording 1Seg unavailable. Delete unnecessary videos or still images. P276 Recording stops when storage area is exhausted while recording. You can record movies, sounds and data broadcasting (video recording) or save When the microSD card is set as the saving destination, recording may not be available movies being broadcasted as still images (still image recording).
Page 206: Setting Timer For Watching Or Recording 1Seg Program
Recording still image You can set by Sync TV start whether to start 1Seg watching after the start notification. When this setting is set to "Yes(Confirm)", a confirmation screen Recording is unavailable during video recording or on the data broadcasting full- appears before 1Seg watching starts.
Page 207 At the specified date and time during a call, a warning, not an alarm, sounds and the Checking/Operating reservation activation notification screen appears. At this time, regardless of the Sync TV settings, You can check/operate reservations in the reservation list screen. 1Seg watching does not start automatically.
Page 208: User Setting
✔INFORMATION User setting Display light is not applied while 1Seg ECO mode is ON. Setting 1Seg watching/recording settings With Close setting for data broadcasting and data broadcasting site set to "Continue" or "Mute", information may be updated even when FOMA terminal is folded, requiring m [1Seg] 8 packet communication fees.
Page 209: Music
WMA files may not be played. Playing music data ..................Note that DOCOMO assumes no responsibility for handling of copy control Managing folders, playlists and music ............CD (CCCD) or for reactions to disability of converting music data to WMA files.
Page 210: Music&Video Channel
Music&Video Channel Music&Video Channel Music&Video Channel Setting/Checking/Canceling programs Music&Video Channel is a service which automatically distributes a program of up Up to 2 programs can be set. To set, Music&Video Channel program site must be to approximately 1 hour at night just by setting your favorite music program etc. registered in My Menu.
Page 211: Playing A Program
✔INFORMATION To set a program with a different UIM installed, first check the program setting Playing a program information from Set program. Checking the program setting information may delete programs not moved to Saved program folder. Operation from Saved program folder in Data Box P211 Even when canceling the setting of program, the site registered in My Menu is not m [MUSIC] 2eSelect a program deleted.
Page 212 The operations below are available on the Music&Video Channel player - When a function that cannot be used concurrently is performed P369 - When FOMA terminal is folded while playing a video program screen. g, T : Play/Pause When many functions are used simultaneously, the tune being played may be interrupted.
Page 213: Operating Music&Video Channel From Data Box
Data failed in downloading, data with Move restriction set, data with replay restriction : Replay restricted, trick play restricted reached, or a time link distribution program cannot be moved. : Replay restricted, trick play restricted : Time link distribution Data cannot be moved to microSD card. b Display name of programs c Program type Deleting a program...
Page 214: Music Player
WMA file saved to microSD card with another FOMA terminal may not be information is downloaded. displayed/played on F-02A. And, if you use a microSD card used for transferring Ce"No" a WMA file from a different FOMA terminal, it may not be recognized by a PC even Pausing downloading : if you switch to MTP mode.
Page 215: Viewing Music Player Screen
Set the copying destination of AAC format files to directly under the PRIVATE : Playlist created by FOMA terminal DOCOMO MMFILE or MUDxxx in MMFILE on microSD card ( P267). : Playlist transferred from a PC * Files named other than "MMFxxxx" or files with extension of "m4a" cannot be displayed or played c Originated even after they are copied.
Page 216: Playing Music Data
If the original song saved to a playlist on FOMA terminal cannot be recognized, "--"  : Chaku-uta full unavailable due to UIM operation restriction, DOCOMO appears as a song name in the playlist and the song cannot be played. : WMA file, Windows Media digital rights management technology...
Page 217 ❖ T (1 sec. or more) : Stop Music player When music data has replay restriction set When selecting "Last played songs" Some music data has replay count, replay expiration and/or replay period Play from the tune that was played when ended last time. restrictions;...
Page 218: Managing Folders, Playlists And Music
Creating playlist from music data to save Managing folders, playlists and music Move the cursor to music data on the music data screen other than Playlistem31e1-3  Moving Chaku-uta full To save selected items, select themeC.  You can move Chaku-uta full between FOMA terminal and microSD card.
Page 219 Removing music data from playlist Sorting play order in playlist freely Music data cannot be removed from the playlist transferred from a PC. Sorting is unavailable for playlist transferred from a PC. Removing music data from a playlist does not delete the music data itself. On the music data list screen in Playlist, m33eMove the cursor to music dataeI or aeC Move the cursor to music data on the music data list screen in...
Page 220 Displaying detail information of music data <Displaying Item F-02A microSD card detail information> Track number 3 one-byte digits Total track number On the music data list screen, move the cursor to music Selecting "Restore original" causes the item above the button to return to the dataem21eh to display various information information as downloaded.
Page 221: Using I-Αppli While Playing Music
Enjoying music in various ways BGM play Using i-αppli while playing music You can set whether to play Music&Video Channel programs or Music player songs in background while using i-αppli. Background play is not available unless the volume of the running i-αppli is set to 0.
Page 223 i-αppli i-αppli i-αppli ....................................Downloading i-αppli ................................Starting i-αppli ..................................Starting i-αppli quickly ............................... Starting i-αppli automatically ............................Starting i-αppli from site, mail or ToruCa ....................... i-αppli To Operating i-αppli stand-by display ..................i-αppli stand-by display Managing i-αppli ................................. Using various i-αppli functions ............................
Page 224: I-Αppli
i-αppli When downloading i-αppli that uses/sends the saved data, serial number of the terminal/UIM, data in IC card (including the number unique to IC card) or i-αppli microSD card A downloading confirmation screen appears. "i-αppli" is software for i-mode compatible mobile phones. From i-mode sites, you With "Guide"...
Page 225: Starting I-Αppli
Downloading Message i-αppli When Message i-αppli is downloaded, the folders for Message i-αppli are Starting i-αppli automatically created in the folder list of Inbox/Outbox/Unsent messages. The I (1 sec. or more) automatically created folder name is set to the name of the Message i-αppli downloaded, which cannot be changed.
Page 226: Watching/Recording Reservation
Icon definitions (Only icons with * are displayed in IC card content). ✔INFORMATION : Osaifu-Keitai compatible i-αppli Display area differs by i-αppli. × : IC card data transferred by iC transfer service i-αppli that vertical and horizontal size is less than 427 240 dots is displayed with : Message i-αppli : i-αppliDX...
Page 227 For i-αppli builders Use icons : Set if you allow i-αppli to use icons for mail, MessageR/F, battery, If i-αppli does not operate normally while building, trace information may help. Press Silent mode and signal level. m [i-αppli] 34on the stand-by display to display Trace information. Note that Start from browser : Set if you allow starting the i-αppli from site (i-αppli To).
Page 228 Setting operations while i-αppli is active Using preinstalled i-αppli ❖ If you delete stored i-αppli, you can download the software from " F Setting Display light time (@ F mobile phone supporters)" site. P276 m [i-αppli] 24e1 or 2 ❖ ver.F (Puchipuchi Zookeeper ver.F) When setting to "Terminal setting", it operates according to Display light time This is an action puzzle game to fulfill the norm by erasing the specified number of...
Page 229 ❖ ❖ Walking checker (Mobile Sports Taizen) You can enjoy hurdle race, pole vault and hammer-throw by tilting and shaking Information such as the number of steps and consumed calories that is recorded by FOMA terminal. Pedometer ( P302) can be graphed out and you can send it via mail. This application supports motion tracking.
Page 230 ❖ ❖ for F for F (J-E (iavatar maker) Speech Translation for F/J-C Speech Translation for F) By voice entry, translate words mainly used for travelling from Japanese to English/ Chinese and vice versa. What you can do with i To use, you are required to agree to the Terms of Service.
Page 231 If saving a place in the server, the saved place is shared with It is unavailable when 2in1 is in B mode. a PC. Note that, about the map or route information, DOCOMO does not guarantee Local Search Search information of shops, facilities or iD-accepting stores Free anything such as precision or immediacy.
Page 232 Map screen and operation " (Map Application)" TOP menu screen and operations Menus appear on TOP menu screen. If you close the menu by c, the map you previously searched for appears. At the first time you use this application, Terms of Service and the instructions for use appear.
Page 233 Screen and operation of the search result of the peripheral information Searching the route to the destination These are the screen and operation for the case that the search result is displayed Search the route by setting the starting point and the destination. Display the route by a map, not for the case they are selected on the list.
Page 234 (Walking route) : Select the criteria for preferential selection of routes from " (Up to you)" " (Many roofs)" " (Few stairs)" (Using express) : Select if you use express even if the total distance of the route is less than 100 km (Car type for ordinary use) : Select the car type for use Search the route You can search all the routes by "...
Page 235 ❖ ❖ Google (Mobile Google map) (G-GUIDE TV Remote Controller) You can search for area information, shop information or contents created by users by displaying the map. You can switch to aerial photograph mode or watch street view. You can also search for the way to the destination by using route search. Map screen * The display is an example.
Page 236 ❖ Recording reservation function (i-αppli banking) You can select a program to record from Program guide of this i-αppli and make a recording reservation of 1Seg. Recording reservation : Activate this application, select a program to make a recording reservation, select " (Reserved program)"...
Page 237 ❖ ❖ 2 (Rakuoku auctioning application 2) (iD setting application) * The display is an example. * The display is an example. It may differ from actual display. It may differ from actual display. Charge-free Electronic money "iD" is a service that enables shopping only by "...
Page 238 ❖ Suica (Mobile Suica Setup i-αppli) "DCMX" is a credit service compatible with "iD" provided by NTT DOCOMO. There are 2 types of DCMX : DCMX mini that allows you to use up to 10,000 per month and DCMX/DCMX GOLD that allows you to use more amount of money than DCMX mini while saving DOCOMO points.
Page 239 ❖ (McDonald's TOKUSURU KEITAI application) Precautions related to Osaifu-Keitai compatible i-αppli DOCOMO assumes no responsibility for the information set in the IC card. ❖ FOMA (FOMA communication © 2008 McDonald's environment check application) * The display is an example. FOMA communication environment check application is an application to check if It may differ from actual display.
Page 240: Starting I-Αppli Quickly
Starting i-αppli quickly Starting i-αppli automatically i-αppli can be started by a simple operation from the stand-by display. Setting whether to start automatically <Auto start> Registering i-αppli as one-key/two-key shortcut You can set whether to automatically start all i-αppli which are set to "ON" for User in Set auto start info.
Page 241: Starting I-Αppli From Site, Mail Or Toruca
✔INFORMATION i-αppli To Even with auto start set, automatic activation does not occur in the cases below, Starting i-αppli from site, mail or ToruCa causing to appear on the stand-by display and to be recorded in Start failure hist. - When the screen except the stand-by display appears Display a site, i-mode mail or ToruCaeSelect a link item to start i- - When it is unavailable due to UIM operation restriction (except for preinstalled i-αppli) or UIM αpplie"Yes"...
Page 242: Managing I-Αppli
When upgrading i-αppli, data such as game scores stored in i-αppli may be erased. When an error that cancels the i-αppli stand-by display occurs, a canceling Some i-αppli may inquire the DOCOMO server about the availability depending on the confirmation screen for the i-αppli stand-by display appears. If you select "Yes", it is length of time of use and number of times of use.
Page 243: Using Various I-Αppli Functions
Moving i-αppli to another folder ✔INFORMATION When the mail folder used for Message i-αppli is not deleted, the mail can be displayed I (1 sec. or more)eSelect a folder from the submenu of the mail folder list. P130 When the folder for Message i-αppli to be deleted is being used (including displaying Move the cursor to i-αppliem3e1-3 list), the i-αppli may not be deleted.
Page 244 Using bar code reader from i-αppli Operate i-αppli to read a code The scanned data is used by i-αppli and saved. Using infrared communication from i-αppli Infrared communication may not be made depending on the other party's device even if it has infrared communication function. "Yes"...
Page 245: Osaifu-Keitai/Toruca
Osaifu-Keitai/ToruCa Using Osaifu-Keitai Osaifu-Keitai ..................................iC transfer service ................................Starting Osaifu-Keitai compatible i-αppli ......................... Checking owner information of IC card ....................Check IC owner Preventing use of IC card function ........................ IC card lock Using ToruCa ToruCa ....................................Receiving ToruCa ..........................ToruCa download Displaying ToruCa ............................
Page 246: Using Osaifu-Keitai
If the data in the IC card is lost, modified or damaged by any means related to Osaifu-Keitai compatible service such as malfunction or model change, DOCOMO assumes no responsibility for the loss of data.
Page 247: Ic Transfer Service
. iC clock or schedule comes transfer service is available at a sales outlet such as DOCOMO Shop near you. - When the function is switched over to another function When you are out of service area or the saved data cannot be used, some Osaifu-Keitai For details of iC transfer service, refer to "Mobile Phone User's Guide [i-mode]...
Page 248: Preventing Use Of Ic Card Function
3eSet required itemseC Performing Timed lock : IC card lock If the power is turned OFF manually or due to exhaustion of the battery while Preventing use of IC card function this function is "ON", IC card lock is activated before the specified time. When locking time comes while using Osaifu-Keitai compatible i-αppli, IC Activation of IC card lock disables using IC card, obtaining ToruCa from IC card card lock is activated upon termination of Osaifu-Keitai compatible i-αppli.
Page 249: Toruca
Using ToruCa ToruCa download ToruCa Receiving ToruCa ToruCa is an electronic card that can be obtained using Osaifu-Keitai; it can be used The savable size of each ToruCa is 1 Kbyte. The maximum size of each ToruCa conveniently as a flier, restaurant card, coupon ticket, etc. (Details) is 100 Kbytes.
Page 250: Displaying Toruca
✔INFORMATION ToruCa list When obtaining ToruCa with an IC card reader, operations are performed according to Displaying ToruCa the settings of ToruCa preference, ToruCa alert, ToruCa auto-read, ToruCa receive alert of Adjust volume and ToruCa receive of Light alert in Light alert. m [Osaifu-Keitai] 3eSelect a folder The obtained/downloaded ToruCa is saved in "ToruCa".
Page 251 m52e1-5 Changing order (sorting) : Searching ToruCa They are sorted temporarily. When the one- and two-byte characters are ToruCa in "Used ToruCa" folder cannot be searched for. mixed in the titles of ToruCa, the sort result by "By title" and "By index" may <Example>...
Page 252: Setting Toruca Functions
Checking the number of ToruCa <Check No. of items> Using ToruCa auto-read <ToruCa auto-read> ToruCa in "Used ToruCa" folder are not included in the number of saved items. You can set if you automatically read enabled ToruCa when using it by placing m [Osaifu-Keitai] 3em6 FOMA terminal over an IC card reader.
Page 253 1eSelect Category fielde1-5 Category selection screen P249 2eEnter a part of the title in the field for Enter text (up to Sorting by title : 10 two-byte (21 one-byte) characters) 3eEnter a part of the index in the field for Enter text (up Sorting by index : to 7 two-byte (15 one-byte) characters) Sorting by no method :...
Page 255: Data Management
Data Management Making full use of image Managing various data Displaying image ................... Using folder or album ................... Editing still images ..................Viewing/Editing data detail information Detail information/Edit detail information Making full use of movie/i-motion Deleting data ....................Playing movie/i-motion ................. Sorting data ..................
Page 256: Displaying Image
Making full use of image : Preinstalled : i-mode, Full Browser, Mail, i-αppli Displaying image : Camera : Frame, Stamp : Data transfer : Searching images from i-mode sites P161 Images (JPEG or GIF format), animations (GIF animations or Flash graphics), and b Type of image created animations can be displayed.
Page 257 While playing animation or created animation, press g to pause/play, press Displaying slide show m7 to play from the beginning (except in full-screen display). Also, while Display images in a folder sequentially in a full-screen. created animation is stopped or while playing created animation after a stop, m [Data Box] 1eMove the cursor to a folderem6 press C to play it in slow motion.
Page 258: Editing Still Images
If pressing I, the frame size can be changed, and if pressing C, the vertical Creating animation × and horizontal sides of the frame can be switched. By the display on the upper You can select up to 9 still images smaller than 480 864 from the same folder and right of the screen, the size after cutting out can be checked.
Page 259: Playing Movie/I-Motion
m0e1 or 2 Restricting the file size : Making full use of movie/i-motion A still image file size is changed to within 90 Kbytes for "Msg attach:Small" Playing movie/i-motion and 2 Mbytes for "Msg attach:Large", and the changed image is saved as a ×...
Page 260 c Play state Select a folder : In play : In stop : In pause d File type : Sound : Movie e Zooming in/out display : Zoomed in display : Zoomed out display Thumbnail display List display For the movie/i-motion with a bookmark set, the confirmation screen appears a Originated for playing from the bookmark.
Page 261 Creating/Playing playlists ✔INFORMATION For some i-motion on which "--:--:--" may appear as the full play duration on the play Saving and managing the titles of movie/i-motion. screen, fast-forwarding/rewinding, playing operation from the bookmark or play stop 100 titles can be saved in 1 playlist. position, or playing using chapter information or tab for specifying position is Movie/i-motion saved in microSD card, i-motion partially saved, i-motion titles unavailable.
Page 262 The following movie/i-motion are unavailable for phonebook, ring alert or ✔INFORMATION incoming call image. Removing a title of movie/i-motion in a playlist does not delete the data itself. When × × × - Other than the image size of 128 96, 176 144 or 320 movie/i-motion is deleted or moved to microSD card, they are removed from the...
Page 263: Editing Movies/I-Motion
c : Retry For a file larger than 500 Kbytes, press m and select "Msg attachment S" to Editing movies/i-motion cut out a file of 500 Kbytes, press m and select "No settings" to cut out a file approximately 1,000 bytes smaller than the maximum size. For a file of 2,048 The movie/i-motion below cannot be edited.
Page 264: Moving I-Motion To Microsd Card
❖ Moving to folder in the FOMA terminal or others Compatible with contents transfer Moving i-motion compatible with contents transfer saved in microSD card Moving i-motion to microSD card Moving is available only when installing the same UIM as when obtaining from Of copyrighted i-motion items downloaded from a site, you can move those the site or moving to microSD card (the model also must be the same for some i- compatible with contents transfer to microSD card.
Page 265: Displaying Chara-Den
Making full use of Chara-den Making a videophone call : Move the cursor to Chara-deneIeEnter a phone number or press C to select from phonebookeI Displaying Chara-den To make a videophone call specifying conditions, enter a phone number and press m. P55 You can display a character instead of camera image during a videophone call.
Page 266: Playing A Melody
Making full use of melody Select a melody Playing a melody Melody number/ Display name Number of melodies Melody in SMF or MFi format can be played. m [Data Box] 5 The folder contents are as given below. i-mode : Melody downloaded from a site or a mail Preinstalled : Melodies for ring tone stored by default P354 Mail attach melody : Melodies for mail attachment stored by default Current play position...
Page 267: Viewing Recorded Video Or Still Images
Displaying recording data of 1Seg If a video that was stopped after being partially played the last time is selected, a confirmation screen to play from where it stopped appears. Note Viewing recorded video or still images that, video is not displayed if its total time is within approximately 15 seconds or if the previous play time was within 5 seconds.
Page 268: Microsd Card
F-02A supports microSD card of up to 2 Gbytes, and microSDHC card of up to 8 Setting operating conditions of recorded still image Gbytes (as of November, 2008). For information about manufacturers or available m [Data Box] 83em4eSet required itemseC sizes of compatible microSD cards, or latest operation check results, read "...
Page 269 Data of file size exceeding 2 Gbytes cannot be used. With some microSD card, the saved movie is distorted. It is recommended that data saved in microSD card should be separately backed up for storage. DOCOMO assumes no responsibility for accidental loss or alteration of data. Installing/Removing microSD card microSD card folder structure Be sure to turn the power off and remove the battery pack beforehand.
Page 270 a My Picture in Multimedia (shot still images, JPEG of DCF standard or GIF) Naming rules for folders and files are as given below. Characters to use should File name : aaaaxxxx.JPG/GIF Savable number : 9,999 items be one-byte characters except " ". b Decome-Anime template "a"...
Page 271: Exchanging Data Between The Foma Terminal And Microsd Card
1-3e"Yes" To move/copy selected items, select themeC. Exchanging data between the FOMA terminal ✔INFORMATION and microSD card When data in My Picture, i-motion, Melody, 1Seg or Decome-Anime template is Moving the music data of MUSIC P216 moved/copied, the file name is automatically changed according to the rules for saving Moving i-motion compatible with contents transfer P262 data to a PC.
Page 272: Displaying Data In Microsd Card
Moving/Copying data from microSD card to the FOMA terminal Displaying data in microSD card When exceeding the savable number/area (data in Data Box) P277 Playing the music data of MUSIC P214 <Example> Moving/Copying Decome-Anime templates 1Seg display P265 m [LifeKit] 35 Update information when data cannot be correctly displayed in FOMA terminal Select a foldereMove the cursor to the data due to change, addition or deletion of data from microSD card by other devices.
Page 273: Managing Microsd Card
Setting i-motion compatible with content transfer as ring alert : Move the cursor to dataem12e1-8e"Yes" Managing microSD card When "Contact alert:Call" or "Contact alert:Mail" is selected, select a phonebook entryeSelect "Yes". Checking the memory space of microSD card Setting i-motion compatible with content transfer as Movie alert : Move the cursor to dataem13e1-3e"Yes"...
Page 274: Usb Mode Settings
Icons below appear on the stand-by display. Displayed in gray when microSD movie/i-motion with voice only in "Movie" before updating the information, or card is not installed. change the file name and save the file in PRIVATE DOCOMO MMFILE folder of : microSD mode : MTP mode microSD card or MUDxxx (xxx is 001-999) in MMFILE using a PC etc.
Page 275: Data Management
Managing various data ✔INFORMATION Deleting a folder in "Movie " of microSD card causes actions below to occur. Using folder or album - When an attempt is made to delete the initial folder, only sub-folders and data of the initial folder are deleted.
Page 276: Viewing/Editing Data Detail Information
❖ Restoring data to fixed folder Playing album Music&Video Channel, Chara-den or data on microSD card cannot be moved back You can play all melodies in the album collectively. to the fixed folder. m [Data Box] 5eMove the cursor to an albumem1 <Example>...
Page 277 List of display items and changeability You can change within 100 characters. Items displayed for an image Detail information contains items given below. Data detail information saved on Type : Type of image microSD card may differ from the information displayed on FOMA terminal. Msg attach size(Bytes) : Attachment size of data that can be attached to mail Display name : Title displayed on FOMA terminal Use as frame, Use as stamp : Indicate whether they can be pasted as a frame or...
Page 278: Deleting Data
Recorded time : Recorded time Sort Copy restriction : Copy permit Sorting data It is not displayed in video (microSD). Sorting MUSIC (Music data) P217 <Example> Sorting data of My Picture Deleting data m [Data Box] 1eSelect a folder m7eSet required itemseC Deleting MUSIC (Music data) P216 Data saved in "Preinstalled"...
Page 279: When Exceeding The Savable Number/Area
Using infrared communication/iC transmission The communication range for infrared communication is about 20 cm or less, and When exceeding the savable number/area the infrared ray radiation angle is 15 degrees or less from the center. Keep FOMA When exceeding the savable number ( P391) or shared memory space size by terminal pointing at the other device's infrared data port and do not move it until downloading or saving data, delete unnecessary saved data following instructions data sending/receiving completes.
Page 280: Sending Data By Infrared Communication/Ic Transmission
File restriction set to "File restricted" on the local terminal or data in "Data transfer" folder). When data is sent to i-mode terminal except F-02A or to infrared communication device, items that cannot be saved by the receiving side are discarded.
Page 281: Receiving Data By Infrared Communication/Ic Transmission
Receiving a single piece of data Receive Ir data or iC transmission You cannot receive data larger than 512 Kbytes. Receiving data by infrared communication/iC ❖ transmission Receiving a data item via infrared communication m [LifeKit] 211e"Yes"eA data item is sent from the You can receive data individually, or collectively by data types.
Page 282: Using Infrared Remote Control Function
Receiving all data You can receive data collectively by data type. Using infrared remote control function The data saved at the receiving side is deleted, and only the received data is Download i-αppli applicable to each model for Infrared remote control. saved.
Page 283: Setting Operations For Data Exchange
Data exchange settings Setting operations for data exchange Operations for data exchange via infrared communication, iC transmission or packet communication or 64K data communication or data transfer by connecting with a PC can be set. m [LifeKit] 25eSet required itemseC End alert : Set whether to sound the end tone at the end of communications.
Page 285 Convenient Functions Multiaccess ..................................Multitask ....................................Searching with a simple operation ......................Quick search Turning power ON/OFF automatically ..................Auto power ON/OFF Setting the timer with a simple operation ..................Countdown timer Ringing alarm clock at specified time ......................Alarm clock Turning power ON at the set alarm time ...................
Page 286 Multiaccess Multitask Multiaccess is a function that enables you to use voice call and i-mode/data Multitask allows you to perform multiple functions at the same time and perform communications simultaneously. operations by switching the screen. Combinations of Multiaccess functions P368 Up to 2 functions can be performed at the same time.
Page 287 Two keywords can be used for searching (insert a space before the second Quick search keyword). Searching with a simple operation When selecting "Start Map", Map Application starts. h to switch to dictionary searcheSelect dictionary Searching by dictionary : You can use search functions by pressing U on the stand-by display or while selection fielde1-3eEnter the keyword in the entry field (up to 20 running functions.
Page 288 Managing search service of Full Browser Countdown timer Up to 10 services can be registered. Setting the timer with a simple operation <Example> Adding search service On the stand-by display, you can enter and set the time (minutes) to elapse before Ueh to switch to Full Browser search the timer sounds.
Page 289: Convenient Functions
h to switch to Set others screeneSet required items Alarm clock Vibrate alert : Setting "Phone setting" applies to Alarm clock in Vibrate alert/ Ringing alarm clock at specified time effect. You can set 1Seg to start after Alarm clock sounds. Light pattern : When "Sync melody"...
Page 290 High-pitched alarm is for drawing attention of others and it does not assure crime During alarm sound : When setting to "Ring alert sound", high-pitched alarm is prevention or security. Please be notified that DOCOMO assumes no responsibility terminated and the operation for incoming call is performed when a call even if any damage occurs while you are using this function.
Page 291: Managing Schedules
✔INFORMATION Scheduler The calendar can display dates between January 1, 2000 and December 31, 2060. Managing schedules Holidays of Calendar are based on "The Public Holiday Law and the Law to Amend Parts of Old-age Persons' Welfare Law (Up to No.43 of 2005)". Spring Equinox Day and Displaying calendar Autumnal Equinox Day may differ since the dates of them are announced by the government gazette on February 1 of the previous year (As of November, 2008).
Page 292 4eCeSet required itemseC h to switch to Other settings screeneSet required items Setting holiday : Up to 11 two-byte (22 one-byte) characters can be entered for a holiday name. Repeat : The schedule event is registered as repeated one except when "None" Set Mark on calendar to "ON"...
Page 293 ❖ When the specified date and time come Checking registered schedule The image, date/time and schedule appears on the display and the timer starts ueSelect the saved schedule day sounding at a Schedule reminder set in Adjust volume. Actions are taken according to the settings to Schedule reminder in Vibrate alert/effect or Call in Light alert.
Page 294 Deleting : Move the cursor to a schedule eventem3e1-4e"Yes" Using member list To delete 1 item, move the cursor to a schedule. ueSelect the saved schedule dayeSelect a scheduleeh to To delete all items, authentication is required. display Members screen When Long-term schedule events including the selected date have been saved and "One day"...
Page 295 CeMove the cursor to a function on the function selection Protecting secret schedules <Secret attribute> screeneC Set secret attribute to a schedule. In Privacy mode ("Hide set schedule" set for Schedule), the schedule with secret attribute does not appear. A function without menu on lower levels can be pasted also by selecting the function.
Page 296 Editing a shortcut Custom menu geMove the cursor to a shortcutem Registering often-used function Move the cursor to an itemePerform necessary operation You can register frequently used functions and make your own menu. Functions of the first level of Custom menu can be activated by pressing the m2ej to move to the destinationeg Sorting the order : corresponding keypad (1-9) for 1 second or more on the stand-by display.
Page 297 Using Custom menu Side key shortcut meCeSelect a menu item Setting a function to be activated by pressing and holding a side key When a function is selected, the function is activated or menu items in lower levels appear. You can set a function so that it is activated by pressing one of SDT for 1 second When a group is selected, the menu items registered in the group appear.
Page 298 Checking user information details Using user information details m [User information]egeAuthenticate m [User information]egeAuthenticate Each time you press h, the details screen is switched. Perform necessary operation When the saved phone number has Caller ID settings, appears at the top Display the phone number details screenen or I Making call : of the details screen.
Page 299 Toy's world Fake call Playing by Toy's world Pretending to be receiving a call and talking The screen changes by tilting or shaking FOMA terminal or in response to voice, Fake call is a function that allows you to pretend you are receiving a call or calling. sound, etc.
Page 300 Recording the other party's voice/image during a call ✔INFORMATION When starting a fake call by using Sub-display menu or pressing the key set in Side key During a call, S (1 sec. or more) shortcut for 1 second or more with the start time of Alert&Time settings set to other than "Ring now", vibrator operates before countdown starts.
Page 301 ❖ Checking call duration Automatically resetting Total calls cost <Reset call cost> You can set whether to automatically reset Total calls cost at 0:00 on the first day of m [Settings & NW services] 751 every month. Last call duration : Duration of last incoming/outgoing voice call, videophone m [Settings &...
Page 302: Calculator
Notifying call cost upper limit <Call cost limit> Calculator When Total calls cost has exceeded the set limit, it is notified with an alarm, icon Using the FOMA terminal as calculator display, etc. Up to 8 digits can be entered. m [Settings &...
Page 303 m5e2 or Checking notes Specifying a completion status to display <List by status> : m [Accessory] 2 Press m51 to restore the display. m6eSet required itemseC Sorting : Creating mail : Move the cursor to a noteem7 Registering to Scheduler : Move the cursor to a noteem8 A screen with note contents already entered to Note field of Scheduler appears.
Page 304: Using Dictionaries
Using search records Dictionaries m [Accessory] 5e1-3em1 Using Dictionaries The search records are displayed. m [Accessory] 5e1-3eEnter a word in entry field (up to Up to 20 items can be recorded. When exceeding the limit, record is 20 two-byte or 40 one-byte characters) overwritten chronologically.
Page 305 And, the logs of steps are retained for about a month even with the battery removed or vacant, but they may be lost if more time passes. Note that, even if the logs of steps are lost, DOCOMO assumes no responsibility. Convenient Functions...
Page 306 b Insert the connection plug of Flat-plug Earphone/Microphone with Switch into Earphone/Microphone with switch the flat-type earphone jack. Using earphone/microphone with switch You can connect an earphone plug with diameter of 3.5 mm to the round-type earphone jack. You can connect an optional Flat-plug Earphone/Microphone with Switch by If you connect an earphone without microphone to the earphone jack, you plugging an optional Earphone Plug Adapter for External connector terminal 01 to cannot send your voice.
Page 307: Microphone With Switch Etc
Making/Receiving calls by pressing switch <Headset Answering call automatically with earphone connected quick-dial/Headset quick-answer> <Auto answer setting> Set if you automatically answer if there is an incoming call while Flat-plug <Example> Making a voice call Earphone/Microphone with Switch is connected. Press the switch (1 sec.
Page 308 Confirm Confirming current settings of functions m [Settings & NW services] 754eh to check the settings ✔INFORMATION In Personal data lock, the set conditions for locked items are displayed as "---". In Privacy mode ("Authorized access" set for My Picture or i-motion), authentication is required.
Page 309: Character Entry
2-touch input method Setting input method ......................... Text input method For details of Kuten Code List, refer to "Kuten Code List" (PDF version) in the attached CD-ROM or on NTT DOCOMO website.    To view PDF version of "Kuten Code List", Adobe Reader is required.
Page 310: Entering Characters
Changing input modes On the character entry screen, I Entering characters Each time you press, the input mode switches as (one-byte numbers) Procedures for entering characters below. (hiragana/kanji) (one-byte katakana) (one-byte alphabets). There are 2 methods for entering characters : 5-touch input method and 2-touch input method.
Page 311 Displaying kana options list : 5-touch input method While entering hiragana characters, press m to display a list of katakana, Entering characters using 5-touch input method alphabetic characters, numbers, dates, time, etc. When there are multiple pages, press I or a to switch pages. Press the key In 5-touch input method, multiple characters are assigned to each key and the for the option or press j to select options.
Page 312 ❖ deSelect the optionege" Converting multiple clauses at a time (Close)" Converted within 24 two-byte characters. <Example> Entering " (Let's go to eat Italian food.)" Convert Option selection list All OK Fix converted portion Change conversion range When there are multiple pages, press I or a to switch pages. * The screen shows the example of l.
Page 313 Entering pictogram and symbol ✔INFORMATION Pictograms and symbols can be converted also by entering readings. P357, 362 Pictogram list P357 Pictograms and symbols transferred via infrared communication may not appear <Example> Entering Pictogram D correctly. Press C on the entry screen of message text or signature editing A pictogram or symbol can be entered also by selecting "Pict/Symbol/Smiley"...
Page 314 ❖ Quoting password data Deleting the saved fixed phrases : Move the cursor to the fixed phraseeme"Yes" On the character entry screen, m43eAuthenticate Enter the fixed phrases (up to 64 two-byte (128 one-byte) Press m53 on the message text entry screen. characters)eC Select password data to quote Phrases are saved in "My phrases".
Page 315 KUTEN code input Copying/Cutting/Pasting characters Entering characters using KUTEN code Only the last item of the copied or cut characters are recorded until the power is Characters, numbers and symbols on the Kuten code list can be entered using 4- turned OFF, and they can be pasted any number of times.
Page 316 Enter the reading in the reading field (up to 8 characters in hiragana) Password manager The word with the characters below entered at the beginning cannot be Registering passwords in advance saved. With authentication information such as user names and passwords registered, (Voiced sound), (Semi-voiced you can quote and enter saved information to a site or website that requires such...
Page 317: Setting Input Method
Authenticate Text input method The characters in the selected range are displayed in the password entry field. Setting input method Enter a title nameeC m [Settings & NW services] 725eSet required itemseC DL dictionary Using downloaded dictionary Input method : Set to "5-touch" or "2-touch". Input prediction : Set if you display the option selection list.
Page 319: Network Services
Network Services Voice Mail service ..................Call waiting ....................Network services available Call Forwarding Service ................You can use the DOCOMO network services below with FOMA terminal. Nuisance Call Blocking Service ..............Service Application Monthly charge Caller ID Request Service ................
Page 320: Voice Mail Service
14e"Yes" [Check setting] : You can change settings from the submenu. Voice Mail service For Number B, Activate/Deactivate can be checked. 15e"Yes"eFollow the voice prompts to operate [Play messages] : If there is an incoming voice or videophone call while FOMA terminal is in a indicates the number of new messages that the voice prompts location where radio waves are hard to reach or is powered OFF or if you do not presents when they are played.
Page 321: Call Waiting
If an incoming voice or videophone call is not answered with Call forwarding activated, it is recorded as a missed call and (the number indicates the Call waiting number of missed calls) appears on the stand-by display. When using 2in1, activation, deactivation, and check setting of Call Forwarding When there is another incoming voice call during a voice call, this service notifies Service can be set for Number A and B respectively.
Page 322: Dual Network Service
m [Settings & NW services] 842eOperate by selecting Setting whether to give guidance for Call forwarding a menu item 1429eneFollow the voice prompts to operate 1e"Yes" [Activate] : For details, refer to "Mobile Phone User's Guide [Network Services]". 2e"Yes" [Deactivate] : 3e"Yes"...
Page 323: Service Numbers
Service Numbers [Answer] : You can make a call to DOCOMO-specified repair office or to general inquiries. When Call Waiting Service is activated, the service starts. When it is The item varies or is not displayed by some UIM types. P41 deactivated, you can answer a voice call after terminating a voice call or 64K When 2in1 is in Dual mode, the caller ID selection screen is displayed.
Page 324 Multi Number 2in1 In addition to Basic Number, you can add and use up to 2 more numbers as phone This service allows you to use 2 phone numbers/mail addresses for 1 mobile numbers of FOMA terminal : Additional No.1 and No.2. phone;...
Page 325 Setting 2in1 <Receive avoidance> 71eSet required itemseC [Change rcv. avoidance] : Set each option with 2in1 ON. Incoming calls from the number with Receive avoidance applied is restricted in m [Settings & NW services] any mode. 87eAuthenticatee"Yes"eOperate by selecting a menu Mode link for avoid.
Page 326 ❖ 2in1 function in each mode Service A mode B mode Dual mode Receive all items via Sender's state is taken over Only items with different actions depending on modes are listed (items with same infrared actions as in A mode are excluded). communication/iC Service A mode...
Page 327: Registering New Network Services
(up to 10 two-byte (20 one-byte) characters)eC subscription to use. USSD code is a service code given by DOCOMO and is used to set network For details, refer to DOCOMO business website (http://www.docomo.biz/d/212/). services etc. It is registered as the USSD code on FOMA terminal.
Page 329: Overseas Use
Overseas use Overview of international roaming service (WORLD WING) ................... Available services overseas ..............................Preparing and checking for overseas use ......................... Making a call from overseas ............................... Receiving a call from overseas ............................Setting a search method for network ..................Network search mode Setting telecommunications carrier to preferentially connect to ............
Page 330: Overview Of International Roaming Service
UIM (not blue) compatible with WORLD WING must be installed in FOMA France Spain terminal. Germany Sweden WORLD WING is available only in the overseas DOCOMO roaming area . For Greece Switzerland available areas, charges and other details, refer to DOCOMO's "International Holland Tahiti (French Polynesia) service web page".
Page 331: Available Services Overseas
For information about countries, areas, telecommunications carriers and other When sending SMS to a party using an overseas telecommunications carrier details applicable to the service, refer to DOCOMO's "International service web except DOCOMO, enter "+" and "Country code" before the receiver's phone page".
Page 332 Setting overseas For the latest information about international call access code and international iMenu "International Settings" "i-mode services Settings" prefix number for the universal number, refer to DOCOMO's "International ❖ service web page". Using network services International call access codes for major countries (table 1) When using Voice Mail or Call Forwarding Service overseas, you need to subscribe to each network services and activate Remote control in advance.
Page 333 Korea roaming service. Austria Luxembourg For countries and overseas telecommunications carriers available, refer to Belgium Malaysia DOCOMO's "International service web page". Brazil 0021 New Zealand For videophone calls, the other party's image displayed on your FOMA terminal Bulgaria Norway may be disturbed or call connection may be unavailable for a reason on the connected terminal.
Page 334: Receiving A Call From Overseas
FOMA terminal is placed out of the current network. Making a call inside the country you stay Setting may be unavailable for some radio wave and/or network conditions. Telecommunications carriers other than NTT DOCOMO cannot be selected in A call may be made without displaying the message. Japan.
Page 335 PLMN setting Setting telecommunications carrier to Setting stand-by display for international preferentially connect to roaming This function is enabled when Network search mode is set to "Auto". Displaying operator name m [Settings & NW services] 9114 You can display an operator name at the top of the display. Networks are displayed in descending order of priority.
Page 336 Roaming guidance Network Service Setting roaming guidance Using network service during international roaming You can set to play voice prompts to notify the caller that the call is in international roaming. You can make settings from overseas for Voice Mail, Call forwarding and other Set before leaving Japan.
Page 337: Pc Connection
Flow of setup for data communication (OBEX communication) ................Flow of setup for data communication ..........................Using CD-ROM ..................................Introduction of DOCOMO keitai datalink .......................... For details of data communication, refer to "Manual for PC Connection" (PDF version) in the attached CD-ROM or on NTT DOCOMO website.
Page 338: Data Communication
FOMA terminal does not support fax communication or Remote Wakeup. Data communication can be performed connecting with musea or sigmarion III of DOCOMO PDA. Note that update is required for using musea. For details of F-02A update method etc., refer to NTT DOCOMO website.
Page 339: Before Using Data Communication
* When connecting to an access point out of the FOMA HIGH-SPEED Area or an access point OS : Windows 2000 SP4 or later, Windows XP SP2 or later (for details, refer to NTT DOCOMO website.) not compatible with HIGH-SPEED, or when using devices not compatible with HIGH-SPEED...
Page 340: Flow Of Setup For Data Communication (Obex Communication)
Installing from attached CD-ROM * Even when the above requirements are satisfied, you may not be able to perform data Downloading from NTT DOCOMO website and installing communication if base station traffic is heavy or the radio wave conditions are poor.
Page 341: Using Cd-Rom
"Yes". Introduction of DOCOMO keitai datalink "DOCOMO keitai datalink" is a software for backing up phonebook, mail and other data in your mobile phone to a PC and edit them. It can be downloaded from NTT DOCOMO website. For details and downloading of this software, refer to the website below.
Page 343: Appendix/Troubleshooting
Updating software ..........................Software update Protecting the FOMA terminal from harmful data ................Scanning function Main specifications ................................Number of saved/registered/protected items in F-02A ....................Specific absorption rate (SAR) of mobile phone ......................Export Administration Regulations ........................... Intellectual Property Right ..............................
Page 344: Menu List
Font type : Japanese SMS report request : Not request methods] Keep in SMS center : 3 days a#c Signature [Auto add] ON SMSC : DOCOMO [Edit signature] Address : 81903101652 a#d Reply setting Type of Number : International a#da Reply format...
Page 345 Access shortcuts i-αppli bhb Connection timeout 60 seconds Menu Default Page bhc Display light time Always on ca Software list bhd Certificate cb i-αppli settings bhda Manage certificate CA Certificate 1-13, DOCOMO Cert1 : On Appendix/Troubleshooting...
Page 346: Dd Phonebook(Uim) New Entry
Menu Default Page Menu Default Page cba Sort software ec Music&Video Channel By access time cbb Auto start ed i-motion cbc Software info disp. ee Melody cbd Display light time ef Kisekae Tool Terminal Setting cbe Vibrate effect eg Chara-den cbf i-αppli shortcuts eh 1Seg cbg Sound effect volume...
Page 347 Accessory Menu Default Page haabd Msg.F ring alert MessageF : Melody/ 2 (Tone2) Menu Default Page Ring time (sec) : 10 ga Scheduler haac Alarm sound gb Notepad haaca Alarm clock sound Alarm clock : Melody/ gc Alarm clock (Alarm clock) gd Calculator haacb Schedule reminder Alarm on time : Melody/...
Page 348 Menu Default Page Menu Default Page haca Call vibrate alert hbag Shortcut icons (Using Shortcut icons), i hacaa Call vibrate alert (iavatar maker), hacab V.phone vibe alert (Pedometer settings) hacb Mail/Msg vibe alert hbah Animated-notice Contacts : All incomings hacba Mail vibrate alert Stand-by Ani-notice : Avatar hacbb Chat M vibrate alert hbb Menu preference...
Page 349 Menu Default Page Menu Default Page hbd Display light hbh Sub-display hbda Display light time hbha Sub-display image Normal use : 10 sec AC adapter connected, i-αppli : Terminal hbhaa Stand-by image Same as Kisekae Tool setting hbhab Clock display format Clock display : OFF i-mode session, Camera session, Movie hbhb Sub-display light...
Page 350 Menu Default Page Menu Default Page hdaee IC lock(power-off) heac Identification mark Remain lock status Identify No. : OFF hdaf Keypad dial lock heb Anonymous caller [Anonymous/Payphone/Unavailable] Disable settings hdb Privacy mode hec Any key answer hdba Call/Mail privacy Call & Logs : Hide set contact hed Headset Mail &...
Page 351 Menu Default Page Menu Default Page hfe Image setting hgc Font size [Substitute image] Medium(Standard) Image : Default Chara-den hgd Software update [Update] [Answer machine image/Response hold [Set auto-update] image/On-hold image/Movie memo Set auto-update : Auto-update image] Day : Unspecified Image : Default Time : 03:00 hff External device...
Page 352 Menu Default Page Menu Default Page hhaaf Voice Mail setting hheb Deactivate hhaag Check messages hhec Check setting hhab Tone/Vibration message hhf OFFICEED Voice Mail alert : ON notification Notification melody : 1 (Tone1) hhfa Area display setting hhac Notify missed call hhfb Start forwarding hhaca Activate hhfc Stop forwarding...
Page 353 Menu Default Page Menu Default Page hhiaa Register USSD hhih Set arrival act hhiab Record reply message hhiha Activate hhib Remote control hhihb Deactivate hhiba Activate hhihc Check setting hhibb Deactivate hhii Arrival call act Answer hhibc Check setting hi Roaming/Call assist hhic Nuis.
Page 354 MUSIC User information Menu Default Page Menu Default Page ia Music player 0 User information Name/Mail address : My phone number : The subscribing ib Music&Video Channel terminal phone number 1Seg Osaifu-Keitai Menu Default Page Menu Default Page #a Activate 1Seg *a IC card content #b Program guide *b DCMX...
Page 355 *1 All certificates saved in UIM are valid by Reset. When "Simple Menu" of Kisekae Tool is set *2 When USB Cable is connected, default settings are not restored by Reset. *3 For the network service, refer to "Mobile Phone User's Guide [Network Services]". *4 Reset causes the settings of Auto time adjust (including Time zone and Summer time) and Offset to be restored to the default.
Page 356 Melodies for mail attachment Melody List Melody List ([ ] is the composer) (Birthday) (William Tell Overture) Melodies for ring tone [GIOACCHINO ANTONIO ROSSINI] (Wedding March) [J L FELIX (Bridal March) [WILHELM RICHARD Melody List ([ ] is the composer) MENDELSSOHN BARTHOLDY] WAGNER] 1 6 (Tone1-6)
Page 357 * You can enter only in one-byte character. @docomo.ne.jp .com .or.jp .go.jp .ne.jp .co.jp .ac.jp http://www. www. .html .htm : One-byte space : Holding down the keypad also switches upper and lower case.
Page 358 List of keypads and character assignments (2-touch input method) Hiragana/kanji mode (two-byte) Alphabet mode (two or one-byte) 2nd digit 2nd digit : Blank Katakana mode (two or one-byte) *1 Upper case mode and lower case mode are switched. 2nd digit *2 "...
Page 359: Pictogram List
Pictogram list You can convert characters by entering the readings in hiragana/kanji mode. Pictogram Reading Pictogram Reading Appendix/Troubleshooting...
Page 360 Pictogram Reading Pictogram Reading Appendix/Troubleshooting...
Page 361 Pictogram Reading Pictogram Reading Appendix/Troubleshooting...
Page 362 Pictogram Reading Pictogram Reading Appendix/Troubleshooting...
Page 363 Pictogram Reading Pictogram Reading Appendix/Troubleshooting...
Page 364: Special Symbol List
Special symbol list You can convert characters by entering the readings in hiragana/kanji mode. Reading Symbol Reading Symbol Reading Symbol Reading Symbol Appendix/Troubleshooting...
Page 365 Reading Symbol Reading Symbol Reading Symbol Reading Symbol Appendix/Troubleshooting...
Page 366 Reading Symbol Reading Symbol Reading Symbol Reading Symbol a b c d e f g h i j k l m n o p q r s * Some may differ from actual displays. * There are types of entered characters as two-byte only, one-byte only and both two/one-byte characters. Appendix/Troubleshooting...
Page 367: Smiley List
Smiley list You can convert characters by entering the readings in hiragana/kanji mode. can also be converted by entering " " or " ". Bashful/Angry (18 items) Greeting/Reply (19 items) Smile/Glad (34 items) Smiley Reading Smiley Reading Smiley Reading Smiley Reading Appendix/Troubleshooting...
Page 368 Cry/Sad (19 items) Doubtful/Impatient (21 items) Others (61 items) Smiley Reading Smiley Reading Smiley Reading Smiley Reading Surprise (28 items) Smiley Reading Appendix/Troubleshooting...
Page 369 Smiley Reading Smiley Reading Smiley Reading Smiley Reading * Some may differ from actual displays. Appendix/Troubleshooting...
Page 370: Multiaccess Combinations
Multiaccess combinations Availability of operations of processes generated/performed for each operation currently in progress is shown below. In i-mode (i-mode connection) includes communication using i-Channel (except information reception), Full Browser and data broadcasting site. i-mode mail reception includes reception of MessageR/F and i-Channel information. ×...
Page 371: Multitask Combinations
Multitask combinations The table below indicates whether an item in New Task start menu can be activated combined with the currently running function/group. Functions that can be activated may be unavailable depending on the condition of FOMA terminal. × : Available : Partilly available : Unavailable Menu items...
Page 372: Introduction Of Options And Related Devices
Collect call (charged : service + call) 106 (no area code) For details, contact a sales outlet such as DOCOMO Shop. For details about the optional devices, refer to the instruction manual for each device. ✔INFORMATION FOMA AC Adapter 01/02...
Page 373 *3 If you use USB HUB, operations may not be performed correctly. Playing data in microSD card P270 *4 Earphone Plug Adapter for External connector terminal 01 is required to connect to F-02A. * For compatible external devices, refer to the website below from a PC.
Page 374: Troubleshooting
If the problem still persists, contact a sales outlet When there is an incoming call, the terminal The authentication screen appears if trying to such as DOCOMO Shop. operates in a ring alert, image or light not set. display the phonebook, mail, etc...
Page 375 With FOMA terminal folded, the operation of Mail, i-αppli and data i-αppli/i-αppli stand-by display cannot be activated. pressing T or SD has no effect. Unavailable due to UIM operation restriction. P40 Still images and movie taken with the camera are Side key hold is ON.
Page 376 OFF the power. sales outlet such as DOCOMO Shop. P91 If FOMA terminal is left open for a while with the When FOMA terminal is folded, the light turns on/...
Page 377: If Error Message Appears Mentioned Below
Error messages If error message appears mentioned below The "(number)" or "(xxx)" in error messages is a code used to distinguish the error sent from i-mode Center. All locked. Check address. Corrupted data. All lock is ON. P98 An incorrect or no mail address was input to the mail i-αppli cannot be started from invalid data read with group.
Page 378 Delete software and IC card data? Infrared/iC transmission Failed to connect via Unable to display because there is an error in the Osaifu-Keitai compatible i-αppli which also deletes authentication. received data. data in the IC card is included in the i-αppli. Select Sending all data was failed because the Sending auto-send message failed.
Page 379 PUK blocked. Infrared communication/iC transmission INBOX is Select "Yes" to update music data (Packet Contact a sales outlet such as DOCOMO Shop. full. Save the data from INBOX into FOMA terminal communication for updating the data is charged). or delete it. P279 Receiving messages stopped.
Page 380 SSL session failed. Time reset. Unable to download/play data. Set auto Unable to play. Connect phone to PC and start A problem was detected with the authentication time adjustment ON in Date & Time and restart application to update music if necessary. process during SSL session.
Page 381 URL address changed.(301) The site or website automatically performs URL transfer or the URL was changed. URL address is not valid.(xxx) Make sure the URL. Usage is currently restricted. Try again later. This message appears when a very large volume of data was sent or received in a predetermined period of time with the i-mode packet flat-rate service used.
Page 382 * If a PC is available, you can use DOCOMO keitai datalink ( P339) and FOMA USB Cable period. Call the contacts listed on the back of this manual, "Repairs".
Page 383 (i-mode fault diagnostic site) Data created, imported or downloaded by the subscriber may be changed or lost when changing models or repairing FOMA terminal. DOCOMO assumes no QR code for responsibility for such incidents. DOCOMO may, at its option, replace your site access mobile phone instead of repairing it.
Page 384: Software Update
(the server for software update Reserved update : Specifies the day and time-slot for automatic update of the managed by DOCOMO). DOCOMO does not use the sent information for purposes software in the specified day and time-slot.
Page 385 - When update is canceled, or update start time is changed (update notification icon) appears in the cases below. - When there is notification from DOCOMO - When the software update screen appears - When reserved update failed, or reserved update is canceled When setting Set auto-update to "Auto-update", set Day and Time to perform...
Page 386 Updating software immediately <Immediate update> Automatically reloaded after the completion of updateeg Immediate update may not be available when the server is busy. "Now update" on Software Update screeneAfter about 5 seconds, download starts automatically Pressing g starts downloading immediately. Updating software at pre-specified time <Reserved update>...
Page 387 ❖ Reserving from other than displayed options : When the reserved time arrives a "Others" When the reserved time arrives, the screen below appears and, after about 5 b Select preferred day seconds, the terminal automatically starts software update. (Pressing g starts Reservation availability for each time period is displayed.
Page 388: Scanning Function
Select "Disable" if you do not use auto-update. Different pattern definition is used for different mobile phone models. Also, note that DOCOMO may stop distribution of pattern definition for models that have Updating pattern definition been on the market for 3 years or more.
Page 389 Displaying scan results Warning level Handling method Warning level 4 "OK" : Delete data that may cause troubles Displaying problem element scanned "Detail" : List names of the detected problem elements a "Detail" while displaying a warning level screen When 6 or more problem elements have been detected, the names of the 6th and subsequent problem names are omitted and the total number of the detected problem elements is displayed.
Page 390: Main Specifications
Up to approx. 2,000 (after preinstalled images that Main specifications can be deleted are deleted) Continuous shooting of still Phone images Product name F-02A File format for JPEG × × Size Approx. 108 (H) Approx. 49 (W) Approx. 16.4 (T) still image (Thickest point : Approx.
Page 391 *5 1Seg watching time indicates the estimated time when FOMA terminal can receive radio waves Number of savable still images (approximate by quality) in F-02A FOMA normally and Flat-plug Stereo Earphone Set P01 (optional) is used for 1Seg watching.
Page 392 ❖ Recording time of movies The total recording time of movies (approximate by quality) in F-02A FOMA terminal, microSD card The movie recording time available varies by Size restrictions, Quality, Image size, The value with Size restrictions set to "None". When Size restrictions is set, the Recording Type, settings of saving destination ( P186) or recording conditions.
Page 393 Savable/ Protectable Type Recordable Number of saved/registered/protected items in number number F-02A 1Seg Image Up to 100 Video Up to 10 Savable/ Programs of Music&Video Channel Up to 10 Protectable Type Recordable Music Up to 30 number number Scheduler Up to 300...
Page 394: Sar Certification Information Intellectual
All phone models should be confirmed to comply with the regulation, before they when tested for compliance against the standard was 0.884W/Kg. While there may are available for sale to the public. The highest SAR value for this FOMA F-02A is be differences between the SAR levels of various phones and at various positions, 0.849 W/kg.
Page 395 Equipment Authorization Search section at http://www.fcc.gov/oet/ (please search on FCC ID VQK-F-02A). organizations through periodic and thorough evaluation of scientific studies. For body worn operation, this phone has been tested and meets the FCC and IC RF...
Page 396: Export Administration Regulations
Important Safety Information AIRCRAFT Export Administration Regulations Switch off your wireless device when boarding an aircraft or whenever you are This product and its accessories may be under coverage of the Export instructed to do so by airline staff. If your device offers flight mode or similar feature Administration Regulations of Japan ("Foreign Exchange and Foreign Trade consult airline staff as to whether it can be used on board.
Page 397 G-GUIDE, G-GUIDE MOBILE and their logos are registered trademarks in "DCMX", "iD" and "HIGH-SPEED" are trademarks or registered trademarks of NTT Japan of U.S. Gemstar-TV Guide International, Inc. and/or its affiliates. DOCOMO. QuickTime is a registered trademark of Apple Inc. in the US and other countries. ...
Page 398 Others FeliCa is a contactless IC card technology developed by Sony Corporation. This product contains a module developed by the Independent JPEG Group. This product is equipped with the technologies of GestureTek, Inc.  Copyright 2006–2008, GestureTek, Inc. All Rights Reserved. "...
Page 399 MEMO...
Page 400 MEMO...
Page 401: Index/Quick Manual
Index/Quick Manual Index ..................................... Quick Manual ..................................
Page 402 Index Using Index You can also use this index listing function names and keywords as "Alphabetical <Example> Downloading Chara-den keyword reference". For functions such as "Save" and "Delete", first search by a Chara-den............69, 263 function name of the first level (bold) and then by an index item of the second layer. Adding/Deleting folder........273 Deleting .............276 Detail information/Edit detail information..274...
Page 403 Call cost limit............Still image settings ..........Charge alert ..............Hide call cost icon..........Switching cameras ..........Charging ..............Reset call cost ............White balance ............Charging jack............... Call duration .............. Zoom..............Charging time.............. Call Forwarding Service ........... 4 frames shooting..........Chat mail..............
Page 404 Headset key control ..........DL dictionary.............. i-Channel ..............Headset quick-dial/Headset quick-answer ..... DOCOMO Cert ............i-Channel ticker............High-pitched alarm............ 29, 31 DOCOMO keitai datalink .......... Icon list ..............Host selection ............Dual Network Service ..........Identification mark ............Image................Adding/Deleting album......... i-αppli .................
Page 405 Displaying/Saving (i-mode mail) ......Moving..............Two time zone clocks ........... 161, 176 Downloading..........Number of messages in folder ......International roaming (WORLD WING)....Editing..............Phone call .............. Internet connection Moving/Copying ........... Protecting .............. Full Browser ............Settings..............Quick mail.............. i-mode..............Slideshow..............
Page 406 Deleting..............Microphone..............Multi window (Full Browser) ........Downloading ............microSD card ............. Multiaccess ..............Mail To................ Adding/Deleting folder ......... Combination of functions ........77, 217 Mail/Msg ring alert ..........Backup..............Multitask ..............Map Application ............Displaying data............Combination of functions ........Map display screen ..........
Page 407 Phonebook..............iD setting application..........Adding ..............J-C Speech Translation for F ....... Network security code ..........Call option ............... J-E Speech Translation for F........ New Task start menu ..........Caller ID settings............. Map Application............ Noise reduction............Copying ..............McDonald's TOKUSURU KEITAI application..Notepad ..............
Page 408 Received calls .............. Days off ..............SMS ................List/Details screen ........... Details screen ............Add bookmark ............Received mail i-mode mail Holiday settings............. Adding to phonebook ........... Received signal level........... No. of items ............Check new SMS ............ 125, 141, 149 Receiving screen........
Page 409 Shooting ..............ToruCa sort rule ............WEB Mail ..............Still image shooting screen ........Toy's world..............Web To............... Style theme ..............Two-key shortcut i-αppli.......... Website .............. 158, 174 Sub address..............WMA file ..............Sub stand-by screen ............ WORLD WING ............. Sub-display............
Page 410 Quick Manual How to use Quick Manual The "Quick Manual" appended to this manual briefly describes the basic screen displays and operating procedure of FOMA terminal. Cut along the cutoff line and fold up the manual as shown below. For the use of international roaming service (WORLD WING), please refer to "Quick Manual (Overseas Use)". Cut along the cutoff line Take care not to hurt yourself when cutting.
Page 411 The characters are inserted at the cursor position. ❖ 1-0 : Select input mode and press keys On the character entry screen, I (several times)eg General Inquiries <docomo Information While displaying items to switch, use j to switch one- successively to change characters to input. Center>...
Page 412 ❖ : Job title Editing the phonebook Camera function : URL Shooting still images Adding to UIM phonebook Switching phonebook : C CePoint the camera at the object and geg m [Phonebook & Logs] 4eEnter a nameeSet Move the cursor to a partyem31 Recording movies required itemseC For UIM phonebook, m3.
Page 413 ❖ Editing/Sending i-mode mail (1 sec. or more) : Search for previous or next Activating/Operating Music&Video frequency available Channel/Music player <Example> Editing unsent mail (with data broadcasting display area) : Move the cursor m [MUSIC] e1 or 2 Editing sent mail : a5 (1 sec.
Page 414 Viewing display : Communication using handsfree-compatible device : Performing 1Seg recording reservation/1Seg in progress recording (only watching stopped) ❖ Top of the display : Speakerphone function in use : i-αppli Auto start failed : Power saving mode activated : Inside OFFICEED area abcdefghijklm : High-pitched alarm is set to "ON"...
Page 415 Menu list a# Mail settings cc Display history Menu list for the case Select startup menu is set to "Basic i-mode Phonebook & Logs menu" is described. ba iMenu da Phonebook Mail bb Bookmark db Phonebook new entry aa Inbox bc Screen memo dc Add group ab Compose message...
Page 416: Services Available
Start/Cancel Self mode 104 (no area code) (not provided for those who do not docomo Premier Club, no charges occur. And, if you subscribe to Keitai Anshin * (1 sec. or more) Start/Cancel Public mode require the service) Pack, you can use the service within the fixed charge of Keitai Anshin Pack.
Page 417 * Call to Japan is charged when calling from a land-line phone. From DOCOMO mobile phone 8921e"Yes" * When calling from an F-02A, dial +81-3-6718-1414 to contact the docomo Information Center. (Press 0 for 1 sec. or more to enter "+".) International call access code for -81-3-5366-3114 * Setting overseas : m [Settings &...
Page 418: Network Service
Germany Sweden Korea India Thailand Holland Switzerland Indonesia Turkey Hong Kong Taiwan For other country code and details, refer to DOCOMO's Ireland Hungary Thailand international service web page. Italy United Kingdom 00 Ireland United Kingdom Korea Israel International call access codes for...
Page 419 * You need "docomo ID/Password" to access the site from your PC. * If you do not have or forget "Network security code" or "docomo ID/Password", Functions designed for public use contact to the numbers for "General Inquiries" on the back of this manual.
Page 420 Please confirm the phone number before you dial. For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo shop etc. near you on the NTT DOCOMO website or the i-mode site. NTT DOCOMO website http://www.nttdocomo.co.jp/english/...
Page 421 Connection Manager ............. 16 AT command ..............34 About Manual for PC Connection This manual describes about data communications using F-02A and how to install "FOMA communication configuration file" and "DOCOMO Connection Manager" contained in CD-ROM. Depending on the environment of your PC, some of operation procedures and/or screens may be different.
Page 422 I FOMA terminal does not support FAX communication or Remote Wakeup. I Data communication can be performed connecting with DOCOMO's PDA like musea or sigmarion III. Note that update of musea is required for use. For details on update such as method, refer to DOCOMO website.
Page 423: Before Use
5MB or more free disk space * Recommended environment for operating DOCOMO Connection Manager is as follows. OS : Windows 2000 SP4 or more, Windows XP SP2 or more (For details, refer to DOCOMO website). Hard disk capacity : 15MB or more free disk space I DOCOMO will not guarantee operations on upgraded OS.
Page 424 Provider) is usually required. This charge is paid directly to the Provider, and is separated from the FOMA service charge. For details on usage charges, contact your Provider. I DOCOMO's Internet connection service, mopera U is available. mopera U is a charged service requiring subscription. You can also use a plan which charges monthly fee only for a month you use this service.
Page 425 Checking FOMA communication configuration file Installing DOCOMO Connection Manager Setting data communication by DOCOMO Connection Manager* Setting communications without using DOCOMO Connection Manager Performing communication * For setting of DOCOMO Connection Manager, refer to "DOCOMO Connection Manager operation manual".
Page 426: Connecting Up Pc To The Foma Terminal
FOMA communication configuration file. DOCOMO Connection Manager When DOCOMO Connection Manager (found on the attached CD-ROM) is installed on a PC, a number of settings required for packet communication or 64K data communication can be simply operated from a PC.
Page 427 Removing USB cable Press the USB cable's release buttons on both sides of the connector ( a ) and remove the connector from FOMA terminal ( b ). Release button Connector Remove the USB cable out from the PC. INFORMATION Be careful not to give excessive force to the connecter of the USB cable when connecting/disconnecting the cable to/from FOMA terminal.
Page 428 On the " (Installation completion screen)", click "OK". Subsequently, install DOCOMO Connection Manager and perform setting of data communication. Continue to install from Step 3 in "Installing DOCOMO Connection Manager". For DOCOMO Connection Manager, refer to "Using DOCOMO Connection Manager".
Page 429 Checking FOMA communication configuration file I When a PC does not detect FOMA terminal correctly, settings and communication cannot be performed. <Example> Checking the driver under Windows Vista Click (Start) " (Control panel)" " (System and maintenance)" " (Device manager)". Under Windows XP a Click "...
Page 430 Uninstalling FOMA communication configuration file I Before operating, refer to "Precautions for installation/uninstallation". I Before operating, remove FOMA terminal from the PC. <Example> Uninstalling the driver under Windows Vista Click (Start) " (Control panel)" " (Uninstall programs)". Under Windows XP Click "...
Page 431: Using Docomo Connection Manager
DOCOMO Connection Manager DOCOMO Connection Manager is the software to make data communication by the plan of connection rate varied by data volume. Using DoDoMo Connection Manager allows you to subscribe to mopera U or set for making data communication connecting FOMA terminal to a PC by simple operation.
Page 432 Click "OK". Using connection software except for DOCOMO Connection Manager DOCOMO Connection Manager includes same function as that of software below and using together is not required. Perform to change setting not to be activated or uninstall as required. mopera U start up tool mopera U connection &...
Page 433: Installing Docomo Connection Manager
For Windows XP, when the confirmation screen for installing of MSXML6/Wireless LAN API is displayed, click "Install" to install MSXML6/Wireless LAN API. After performing to install MSXML6/ Wireless LAN API, reboot Windows to start installation of DOCOMO Connection Manager automatically.
Page 434 Click " (Next)". Check " (Precautions)" and click " (Next)". Check the contents of (Software license agreement) and if you agree to the agreement, select " (Agree to the clauses of the agreement)" and click " (Next)".
Page 435 When the "InstallShield (Performed InstallShield wizard)" screen appears, click " (Done)". Installing DOCOMO Connection Manager is complated. INFORMATION Installation may take a few minutes. When a message notifying you to reboot Windows is displayed, follow the instruction of screen and reboot.
Page 436 When booting a PC at first time, the setting wizard screen appears automatically. Setting for communication according to the setting wizard. Perform to set for making data communication connecting to Internet. After setting, you can perform communication using DOCOMO Connection Manager. For details, refer to " (DOCOMO Connection Manager operation manual)".
Page 437: Setting Communications Without Using Docomo Connection Manager
Setting communications without using DOCOMO Connection Manager The method of dialup connection setup without DOCOMO Connection Manager is explained. I When using an access point compatible with HIGH-SPEED such as mopera for packet communication, make settings using DOCOMO Connection Manager.
Page 438 Setting the dialup connection (APN) <Example> Setting under Windows XP Connect FOMA terminal to a PC. Connection method Click " (Start)" Select " (All programs)" (" (Programs)" for Windows 2000) " (Accessories)" " (Communication)" and click " (HyperTerminal)". Enter the desired dialup connection name in " (Name)"...
Page 439 Enter the dialup connection (APN) in the format "AT+CGDCONT =<cid>, "<PDP_TYPE>", "<APN>"" <cid> : Enter any number between 2 or 4-10. <PDP_TYPE> : IP or PPP <APN> : Dialup connection (APN) +CGDCONT command P41 "Supplement to AT command" If nothing is displayed even when AT command is entered, enter ATE1 and press Check that "OK"...
Page 440 Enter the desired dialup connection name in " (Name)" Click "OK". The following characters (one-byte) cannot be used in " (Name)". ?<> Enter a fictional phone number (such as "0") for " (Phone number)" Check that "FOMA F02A" is set for " (Connection method)"...
Page 441 Check that "OK" is displayed and click " (File)" Click " (End HyperTerminal)". When confirming disconnection, click " (Yes)" When confirming saving, click " (No)". Show/Hide caller ID function by dialup network settings The dialup network settings can also be used to append 186 (Notify)/184 (Not notify) to the dialup connection number.
Page 442 Select " (Set up dialup connection)" and click " (Next)". When the " (Which modem will you use?)" screen is displayed Click "FOMA F02A". Enter the phone number of the dialup connection in " (Dialup phone number)" (" <cid>#" for packet communication) with one-byte Enter "...
Page 443 Setting TCP/IP protocol Click (Start) " (Dialup connection)". Right-click the dialup connection created and click " (Property)". Check the setting of each item in " (General)" tab. If multiple modems are installed in the PC, check that " FOMA F02A (Modem- FOMA F02A)"...
Page 444 Setting dialup network for Windows XP Setting dialup connection Connect FOMA terminal to a PC. Connection method Click " (Start)" Select " (All programs)" " (Accessories)" " (Communication)" and click " (Network connection)". Click " (Create new connection)" in " (Network task)".
Page 445 Select " (Use dialup modem to connect)" and click " (Next)". When " (Device selection)" screen is displayed Select only " FOMA F02A (Modem-FOMA F02A)" and click [ (Next)]. Enter the desired dialup connection name in "ISP (ISP name)" Click " (Next)".
Page 446 Enter " (User name)" Enter " (Password)" Enter " (Password confirmation entry)" Select all items as shown below and click " (Next)". When the access point is mopera U or mopera, you do not need to enter " (User name)", " (Password)"...
Page 447 Click " (Network)" tab Set each item as shown below. Since "QoS (QoS packet scheduler)" settings in " (Use these items for this connection)" can not be changed, leave it as it When settings of IP and DNS information have been requested from the provider, etc.
Page 448 Setting dialup network for Windows 2000 Setting dialup connection Connect FOMA terminal to a PC. Connection method Click " (Start)" Select " (Programs)" " (Accessories)" " (Communication)" and click " (Network and dialup connections)" Double-click " (Create new connection)" icon. When "...
Page 449 Select " (LAN) (Set Internet connection manually or connect using local area network (LAN))" and click " (Next)". Select " (Connect to Internet using phone line and modem)" and click " (Next)". When " (Modem selection)" screen is displayed Select "FOMA F02A" and click [ (Next)].
Page 450 Set each item in " (Connection)" tab as shown below. Click " (Address)" tab Set each item. When settings of IP and DNS information have been requested from the provider, etc., set various information. When the access point is mopera U or mopera, you do not need to change the setting.
Page 451 Enter the desired dialup connection name in " (Connection name)" Click " (Next)". You cannot use "." (one-byte period) at the beginning of " (Connection name)". Select " (No)" and click " (Next)". Click " (Done)". Setting TCP/IP protocol Select the created dialup connection icon and click " (File)"...
Page 452 Check the setting of each item in " (General)" tab. If multiple modems are installed in the PC, check that " FOMA F02A (Modem- FOMA F02A)" is only selected under " (Connection method)". Uncheck ( ) other than selected modem. COM port number assigned to the modem displayed at "...
Page 453 Performing communication Starting communication and disconnection are explained here. <Example> Performing communication under Windows XP Connect FOMA terminal to a PC. Connection method Click " (Start)" Select " (All programs)" " (Accessories) " (Communication)" and click " (Network connection)" Double-click the connection icon. Under Windows 2000 Click "...
Page 454 INFORMATION FOMA terminal displays a connecting screen when you execute packet communication or 64K data communication. The following screens are displayed when a connection has been established. For packet For 64K data communication communication The communication speed displayed on your PC may differ from actual speed. The transmission is available only with FOMA terminal that was connected when the connection icon was created.
Page 455 AT command AT commands are commands for setting FOMA terminal functions using a PC. FOMA terminals comply with AT commands and support some extended commands and proprietary AT commands. AT commands AT command input format "AT" must be entered before each AT command. Commands must be entered in one-byte alphanumeric characters.
Page 456 Disconnect line when entered during a communication. Execute in online command mode. NO CARRIER ATI<n> Display the confirmation code. n=0 : "NTT DoCoMo" n=1 : Display model name of FOMA terminal ATI0 n=2 : Display version of FOMA terminal n=3 : Display elements of ACMP signals...
Page 457 Upper slot : Command Description Lower slot : Example ATS4=<n> Set the line feed (LF) character. When result code is displayed as alphabetic characters, appends the character after the carriage return (CR) character. ATS4=10 n=10 (fixed value) ATS4? : Display current settings ATS5=<n>...
Page 458 Upper slot : Command Description Lower slot : Example AT&D<n> Set the operation performed when circuit ER (DTR) signal received from DTE is switched from ON to OFF while online data mode takes effect. AT&D2 n=0 : Ignore status (status is always considered to be ON) n=1 : Move to online command mode when status changes from ON to OFF n=2 : Disconnect line and move to offline mode when status changes from ON to OFF (default)
Page 459 Upper slot : Command Description Lower slot : Example AT+CAOC Display last call cost. AT+CAOC +CAOC : "000024" AT+CBC Display FOMA terminal's battery level in the "+CBC : <bcs>,<bcl>" format. bcs=0 : Powered by the battery pack bcs=1 : Not powered by the battery pack AT+CBC bcs=2 : Battery pack removed bcs=3 : Power-supply error...
Page 460 Upper slot : Command Description Lower slot : Example AT+CLIR=<n> Set whether to send phone number to the receiver when sending 64K data communication. n=0 : Use the setting in service agreement n=1 : Not send AT+CLIR=2 n=2 : Send (default) AT+CLIR? : Display the current settings and status in the "+CLIR : <n>,<m>"...
Page 461 Lower slot : Example AT+CUSD=<n>,"<str>" Inquiry and set for Additional service (Register USSD) of Network Services. Enter Service code provided by DOCOMO in <str>. AT+CUSD=0,"012345678" n=0 : Not answer mid result (default) n=1 : Answer mid result in "+CUSD : <m>, "<str>",0" format...
Page 462 Error messages list Text display Description SIM not inserted No UIM SIM wrong Other than DOCOMO SIM (IC card equivalent to UIM) is inserted. incorrect password Incorrect password unknown Unknown error Supplement to AT command I <cid> is the number used to control dialup connection (APN) for packet communication to be registered in FOMA terminal.
Page 463 Operation performed when parameter is omitted AT+CGDCONT= : Return all <cid> to the setting by default. AT+CGDCONT=<cid> : Return the specified <cid> to the setting by default. AT+CGDCONT? : Display current settings. AT+CGDCONT=? : Display a list of assignable values. Command name : +CGEQMIN=[parameter] Outline Set the criteria for judging whether to permit QoS (Quality of Service) provisioned by the network...
Page 464: Result Codes
Result codes I When ATV command is set to n=1 (default), the result code is displayed in alphabetic characters. When the command is set to n=0, the result code is displayed numerically. Result codes Text display Meaning Operation performed normally CONNECT Terminal connected to other party RING...
Page 465 Communication protocol result code Text display Meaning PPPoverUD Connect via 64K data communication (BC=UDI, +CBST=116,1,0) AV64K Connect via 64K videophone PACKET Connect via packet communication Display example of result code When ATX0 is set Regardless of the settings of AT V command, only "CONNECT" is displayed upon completion of connection.
Page 466: Kuten Code List
Kuten Code List For entering characters using code, see "Entering characters using code" in the attached manual. Note that some characters in the code input list may look different from actual ones. 4th digit of code 4th digit of code 4th digit of code -3rd -3rd...
Page 467 4th digit of code 4th digit of code 4th digit of code -3rd -3rd -3rd...
Page 468 4th digit of code 4th digit of code 4th digit of code -3rd -3rd -3rd...
Page 469 4th digit of code 4th digit of code 4th digit of code -3rd -3rd -3rd...

Docomo Style F-02A Instruction Manual

Table of Contents

Before Using the Handset

I-Mode/I-Motion/I-Channel

Music

I-Αppli

Osaifu-Keitai/Toruca

Data Management

PC Connection

Quick Links

Chapters

Troubleshooting

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Docomo Style F-02A

Summary of Contents for Docomo Style F-02A