Mazda 323 Workshop Manual Supplement page 74

ENGlNE STAND DISMOUNTING
B2
ENGiNE STAND DISMOUNTING
PROCEDURE
1.
Remove the
engine
from the SST (engine
stand).
2. Remove the
SST (engine hanger)
from the engine.
3. Install the parts shown in the figure.
4. Tighten the parts to the specified torques.
Torque Specifications
f&n (m-kg, ft-lb)
93GOB2-75
Water
Inlet Pipe
1. Remove ail foreign material from the water inlet pipe mount-
ing surfaces.
2. Install a new gasket and the water inlet pipe.
Tightening torque:
f9-25 Nm (1.9-2.6 m-kg, 14-19 ft-lb)
93GOB2-753
82-21