Mazda 323 Workshop Manual Supplement page 81

INSTALLATION
I
1
93EOB2-061
03 UOBX-848
93EOBZ07E
93GOB2-760
93GOB2-737
E32-28
4. Install the joint shaft.
5. Tighten the bolts in the order shown.
Tightening torque:
42-62
N=m
(4.3-6.3
m-kg, 31-46 ft-lb)
Tie-rod end
1. Install the tie-rod end to the
knuckle.
Tightening torque:
42-57
Nmm
(4.3-5.8
m-kg, 31-42 ft-lb)
Z.-Install a new cotter pin.
StabiIiter
I. Install and adjust
the stabilizer.
Dimension A: 17.19mm (0.67-0.75 in)
Tightening torque:
f 6-23 Nm (I .6-2.3 m-kg, 12-17 ft-lb)
Exhaust pipe
I. InstaIl the exhaust pipe along with a new gasket,
tighten locknuts @:
Loose1 y tighten brat ket
Tighten
locknuts @
nuts @
and loosely
2.
3.
Tightening torque:
31-46 Mm (3.2-4.7 m-kg, 23-34 ft.lb)
4.
Tighten bracket nuts @,
Tightening torque:
21-27
Nm
(2.1-2.8
m-kg, 15-20 ft-lb)
Select and
shift
cables
1. Install the select cable and the spring pin.
2. Install
the shift cable and the spring pin,